IL-S-6P-S2T2-EF Equivalent & Substitute Parts

Part Overview

The IL-S-6P-S2T2-EF is a rectangular connector header manufactured by JAE Electronics, designed for through-hole mounting with 6 positions at 2.00mm pitch. This shrouded 4-wall header connector features kinked pin solder termination and detent lock fastening, suitable for board-to-cable/wire applications. The part is classified as obsolete, making identification of equivalent substitute components necessary for ongoing design support and procurement continuity.

Substiute Parts

IL-S-6P-S2T2-EF

JAE ElectronicsIn Stock: 980IL-S-6P-S2T2-EF Datasheet

Current PartRFQ

SWR201-NRTN-S06-SA-WH

Sullins Connector SolutionsIn Stock: 13512SWR201-NRTN-S06-SA-WH Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the IL-S-6P-S2T2-EF is determined by the following critical parameters:

• Connector geometry: 6-position, 2.00mm pitch header with shrouded 4-wall design
• Electrical interface: Male pin contact type with tin finish on brass material
• Mounting and termination: Through-hole mounting with kinked pin solder termination and detent lock fastening
• Material compliance: Polyamide (PA66) insulation with UL94 V-0 flammability rating
• Environmental rating: Operating temperature range and moisture sensitivity level

The substitute part SWR201-NRTN-S06-SA-WH from Sullins Connector Solutions matches these core geometric and functional parameters, enabling direct functional replacement in applications where the IL-S-6P-S2T2-EF is specified.

Parameter Comparison

Engineering Selection Recommendations

The SWR201-NRTN-S06-SA-WH is functionally equivalent to the IL-S-6P-S2T2-EF for applications requiring a 6-position, 2.00mm pitch shrouded header connector with through-hole solder termination. Both parts share identical connector geometry, contact configuration, and material specifications.

The Sullins part carries active product status with ROHS3 compliance certification, providing supply chain continuity and regulatory alignment for new designs. The JAE part is obsolete, necessitating transition to an equivalent alternative.

Electrical rating differences exist: the IL-S-6P-S2T2-EF is rated 3A per contact at 300VAC/400VDC, while the SWR201-NRTN-S06-SA-WH is rated 1A per contact at 125V. Application-specific electrical requirements must be evaluated to confirm the Sullins part meets circuit demands.

Operating temperature range differs: the JAE part operates -40°C to 85°C, while the Sullins part operates -25°C to 85°C. Applications requiring operation below -25°C require confirmation that the Sullins part is suitable.

Frequently Asked Questions (FAQ)

Q: Can the SWR201-NRTN-S06-SA-WH directly replace the IL-S-6P-S2T2-EF in existing designs?

A: Both connectors share identical 6-position, 2.00mm pitch geometry with shrouded 4-wall design and through-hole solder termination. Physical and mechanical compatibility is confirmed. Electrical rating compatibility must be evaluated based on circuit requirements.

Q: What are the key differences between these two parts?

A: Primary differences are electrical ratings (3A vs. 1A per contact; 300VAC/400VDC vs. 125V), operating temperature range (-40°C to 85°C vs. -25°C to 85°C), insulation color (brown vs. white), and product status (obsolete vs. active). Mechanical and contact specifications are equivalent.

Q: Does the insulation color difference affect compatibility?

A: Insulation color is a visual identifier only and does not affect electrical or mechanical function. The brown IL-S-6P-S2T2-EF and white SWR201-NRTN-S06-SA-WH are functionally interchangeable from a connector standpoint.

Q: What compliance certifications apply to the substitute part?

A: The SWR201-NRTN-S06-SA-WH is ROHS3 compliant and REACH unaffected. Both parts carry UL94 V-0 flammability rating and EAR99 export classification.

Q: Are there inventory considerations for the substitute part?

A: The SWR201-NRTN-S06-SA-WH is available in bulk packaging with 13,488 pieces in stock, compared to 954 pieces for the obsolete IL-S-6P-S2T2-EF. The active status and higher inventory of the Sullins part support long-term supply availability.