IL-S-15P-S2L2-EF Equivalent & Substitute Parts

Part Overview

The IL-S-15P-S2L2-EF is a rectangular connector header manufactured by JAE Electronics, designed for through-hole, right-angle mounting applications. This 15-position connector with 2.00mm pitch serves board-to-cable/wire interconnection requirements. The product is currently obsolete, making identification of compatible substitute components essential for ongoing system support, maintenance, and new design implementations where legacy compatibility is required.

Substiute Parts

IL-S-15P-S2L2-EF

JAE ElectronicsIn Stock: 795IL-S-15P-S2L2-EF Datasheet

Current PartRFQ

DF3-15P-2DS(01)

Hirose Electric Co LtdIn Stock: 1015DF3-15P-2DS(01) Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the IL-S-15P-S2L2-EF is determined by strict alignment of the following critical parameters:

• Connector Type & Contact Configuration: Header with male pin contacts
• Position Count & Pitch: 15 positions at 0.079" (2.00mm) mating pitch
• Mounting & Orientation: Through-hole, right-angle mounting
• Shrouding Design: Shrouded with 4-wall configuration
• Fastening Mechanism: Push-pull fastening type
• Electrical Performance: Minimum 3A current rating and voltage compatibility
• Environmental Compliance: UL94 V-0 flammability rating

The DF3-15P-2DS(01) from Hirose Electric Co Ltd meets these core substitution criteria, maintaining functional and mechanical compatibility for applications requiring IL-S-15P-S2L2-EF replacement.

Parameter Comparison

Engineering Selection Recommendations

The DF3-15P-2DS(01) is a direct functional substitute for the obsolete IL-S-15P-S2L2-EF. Both connectors share identical mating pitch, position count, mounting configuration, and push-pull fastening mechanism. The Hirose component is currently in active production status with RoHS compliance certification, providing supply chain continuity and regulatory alignment for new designs and legacy system support.

The DF3-15P-2DS(01) operates across an extended temperature range (-55°C ~ 105°C) compared to the IL-S-15P-S2L2-EF (-40°C ~ 85°C), offering broader environmental performance capability. Both components maintain UL94 V-0 flammability ratings and unlimited moisture sensitivity classification, ensuring equivalent safety and reliability characteristics.

Frequently Asked Questions (FAQ)

Q: Can the DF3-15P-2DS(01) directly replace the IL-S-15P-S2L2-EF in existing applications?

A: Yes. Both connectors share identical mating pitch (2.00mm), position count (15), mounting type (through-hole right-angle), shrouding configuration (4-wall), and fastening mechanism (push-pull). Mechanical and electrical compatibility is maintained.

Q: What are the key differences between these two connectors?

A: The primary differences are contact finish (tin vs. gold plating), contact length dimensions, insulation height, and operating temperature range. The DF3-15P-2DS(01) provides extended temperature performance (-55°C ~ 105°C vs. -40°C ~ 85°C) and is actively manufactured with RoHS compliance.

Q: Are there packaging considerations when switching from IL-S-15P-S2L2-EF to DF3-15P-2DS(01)?

A: The IL-S-15P-S2L2-EF is supplied in standard packaging, while the DF3-15P-2DS(01) is available in bulk packaging. Procurement and inventory management processes may require adjustment based on your supply chain requirements.

Q: Do both connectors meet the same compliance standards?

A: Both components carry UL94 V-0 flammability ratings and MSL 1 (unlimited) moisture sensitivity classification. The DF3-15P-2DS(01) additionally carries RoHS compliance certification, meeting current regulatory requirements for new product designs.

Q: What is the current availability status of these parts?

A: The IL-S-15P-S2L2-EF is obsolete with limited remaining inventory (729 pcs). The DF3-15P-2DS(01) is in active production with current stock availability (923 pcs), ensuring reliable supply for ongoing applications.