IL-S-13S-S2C2 Equivalent & Substitute Parts Reference

Part Overview

The IL-S-13S-S2C2 is a 13-position rectangular connector receptacle housing manufactured by JAE Electronics. This component is designed for applications requiring a free-hanging, in-line receptacle with crimp-type female socket contacts at 2.00mm pitch. The part is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support, maintenance, and new design implementations where legacy compatibility is required.

Substiute Parts

IL-S-13S-S2C2

JAE ElectronicsIn Stock: 1135IL-S-13S-S2C2 Datasheet

Current PartRFQ

0510901300

MolexIn Stock: 10700510901300 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the IL-S-13S-S2C2 is determined by strict alignment with the following critical parameters:

• Connector Type & Contact Configuration: Must be a receptacle with female socket contacts
• Position Count & Pitch: Exactly 13 positions at 0.079" (2.00mm) pitch
• Row Configuration: Single row layout
• Mounting & Termination: Free hanging (in-line) mounting with crimp-type termination
• Environmental Compliance: Operating temperature range of -40°C to 85°C minimum; MSL rating of 1 or equivalent

The Molex 0510901300 meets all substitution criteria as a parametric equivalent. Both components share identical electrical and mechanical specifications across all critical dimensions and functional parameters.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: Molex 0510901300

The Molex 0510901300 is a direct parametric equivalent to the IL-S-13S-S2C2. Both components are classified as obsolete products, indicating end-of-life status from their respective manufacturers. Selection between these two parts should be based on:

• Inventory Availability: IL-S-13S-S2C2 has 1050 units in stock; 0510901300 has 974 units in stock
• Regulatory Compliance: Both components maintain REACH Unaffected status and EAR99 classification
• RoHS Compliance: The Molex part carries ROHS3 Compliant certification
• Packaging: IL-S-13S-S2C2 is supplied with unspecified packaging; 0510901300 is supplied in bulk packaging

For applications requiring new component procurement or long-term system support, the Molex 0510901300 is the recommended equivalent due to its RoHS3 compliance certification and confirmed bulk availability.

Frequently Asked Questions (FAQ)

Q: Can the IL-S-13S-S2C2 and Molex 0510901300 be used interchangeably?

A: Yes. Both components are receptacle housings with identical electrical and mechanical specifications: 13 positions, 2.00mm pitch, single row, free-hanging in-line mounting, and crimp termination. They are parametric equivalents suitable for direct substitution in applications where the original part is no longer available.

Q: What does "Contacts Not Included" mean for the IL-S-13S-S2C2?

A: The IL-S-13S-S2C2 is a connector housing only. Individual female socket contacts must be sourced separately and crimped into the housing during assembly. The same applies to the Molex 0510901300 substitute.

Q: Are there differences in insulation material between the two parts?

A: The IL-S-13S-S2C2 specifies Polyamide (PA66), Nylon 6/6 insulation material. The Molex 0510901300 insulation material is not specified in the provided data. Both parts operate within the -40°C to 85°C temperature range and carry MSL 1 (Unlimited) ratings.

Q: Why are both parts classified as obsolete?

A: Obsolete status indicates that both the JAE Electronics IL-S series and Molex Mi II 51090 series have reached end-of-life. Manufacturers no longer produce these components. Existing inventory from authorized distributors represents the available supply for replacement and maintenance applications.

Q: What is the significance of RoHS3 compliance for the Molex part?

A: RoHS3 compliance certifies that the Molex 0510901300 meets Restriction of Hazardous Substances Directive requirements, restricting the use of specific hazardous materials in electrical and electronic equipment. This certification is relevant for applications subject to EU environmental regulations or equivalent standards.

Q: How should I verify compatibility before substituting the Molex part?

A: Compatibility is confirmed by matching the critical parameters: 13-position receptacle, 2.00mm pitch, single row, free-hanging in-line mounting, and crimp termination. Verify that your application's connector housing and contact specifications align with these parameters. Consult your system documentation or original design specifications to confirm compatibility with the mating plug connector.