IL-G-8P-S3T2-SA-1 Equivalent & Substitute Parts

Part Overview

The IL-G-8P-S3T2-SA-1 is a rectangular connector header manufactured by JAE Electronics, designed for through-hole mounting in board-to-cable/wire applications. This shrouded, single-wall header accommodates 8 positions at 2.5mm pitch and is actively produced. Equivalent parts are identified to support procurement flexibility, inventory management, and supply chain continuity for this connector category.

Substiute Parts

IL-G-8P-S3T2-SA-1

JAE ElectronicsIn Stock: 848IL-G-8P-S3T2-SA-1 Datasheet

Current PartRFQ

0022111081

MolexIn Stock: 10700022111081 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the IL-G-8P-S3T2-SA-1 is determined by the following critical parameters:

• Connector type (Header)
• Contact type (Male Pin)
• Number of positions (8)
• Pitch - mating (0.098" / 2.50mm)
• Number of rows (1)
• Mounting type (Through Hole)
• Shrouding configuration (Shrouded - 1 Wall)
• Termination method (Solder)
• Fastening type (Friction Lock)
• Contact shape (Square)
• Contact material (Brass)
• Insulation material (Polyamide/Nylon)
• Contact finish (Gold)
• Flammability rating (UL94 V-0)

The Molex 0022111081 connector satisfies all critical substitution parameters, making it a direct equivalent for the IL-G-8P-S3T2-SA-1 in applications requiring an 8-position, 2.5mm pitch shrouded header with through-hole solder termination.

Parameter Comparison

Engineering Selection Recommendations

Both the IL-G-8P-S3T2-SA-1 and 0022111081 are active products with equivalent compliance certifications. The IL-G-8P-S3T2-SA-1 carries RoHS Compliant status, while the 0022111081 carries ROHS3 Compliant status, both meeting current regulatory requirements. Both connectors are classified as MSL 1 (Unlimited moisture sensitivity level) and carry EAR99 export classification.

Selection between these parts should be based on availability, lead time, packaging format (JAE supplied in standard packaging; Molex supplied in bulk), and established supplier relationships. Both parts are suitable for identical electrical and mechanical applications.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0022111081 directly replace the JAE IL-G-8P-S3T2-SA-1 in existing designs?

A: Yes. Both connectors share identical critical parameters: 8-position, 2.5mm pitch, shrouded single-wall header configuration, through-hole solder termination, and friction lock fastening. Physical and electrical compatibility is established.

Q: What are the key differences between these two connectors?

A: The primary differences are contact length dimensions and insulation height. The IL-G-8P-S3T2-SA-1 has a contact length of 0.157" (4.00mm) mating and 0.378" (9.60mm) overall, with 0.280" (7.10mm) insulation height. The 0022111081 has 0.295" (7.49mm) mating contact length and 0.559" (14.20mm) overall, with 0.461" (11.70mm) insulation height. These dimensional differences may affect board layout and mating connector selection.

Q: Are there any compliance or certification differences?

A: Both connectors meet UL94 V-0 flammability requirements and carry MSL 1 ratings. The IL-G-8P-S3T2-SA-1 is RoHS Compliant; the 0022111081 is ROHS3 Compliant. Both are EAR99 classified and share the same HTSUS code.

Q: What packaging formats are available?

A: The IL-G-8P-S3T2-SA-1 is supplied in standard packaging with 770 pieces in stock. The 0022111081 is supplied in bulk packaging with 981 pieces in stock.

Q: Which connector should be selected for new designs?

A: Selection should be based on availability, lead time requirements, and mating connector compatibility. Both are active products suitable for new applications requiring an 8-position, 2.5mm pitch shrouded header.