IL-G-11P-S3L2-SA Equivalent & Substitute Parts

Part Overview

The IL-G-11P-S3L2-SA is a rectangular connector header manufactured by JAE Electronics, designed for through-hole, right-angle board-to-cable/wire applications. This 11-position connector operates at 3A per contact with a 2.5mm pitch and is rated for -40°C to 85°C environments. The part is currently active in production with RoHS compliance and unlimited moisture sensitivity rating. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when inventory requirements necessitate qualified alternatives.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Number of Positions	11
Pitch - Mating	0.098" (2.50mm)
Mounting Type	Through Hole, Right Angle
Shrouding	Shrouded - 1 Wall
Termination	Solder
Current Rating	3A per Contact
Operating Temperature	-40°C ~ 85°C
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS Compliant

Substitute Part Grouping Explanation

Substitution eligibility for the IL-G-11P-S3L2-SA is determined by strict alignment of the following critical parameters:

Connector type: Header
Contact type: Male pin
Number of positions: 11
Pitch - mating: 0.098" (2.50mm)
Mounting type: Through hole, right angle
Shrouding: Shrouded - 1 wall
Termination: Solder
Fastening type: Friction lock
Contact material: Brass
Contact finish: Tin
Insulation material: Polyamide/Nylon
Material flammability rating: UL94 V-0
Moisture sensitivity level: 1 (Unlimited)

The Molex 0022051112 meets all critical substitution criteria, qualifying it as a direct equivalent for the IL-G-11P-S3L2-SA in applications requiring these specifications.

Parameter Comparison

Parameter	IL-G-11P-S3L2-SA (JAE)	0022051112 (Molex)
Manufacturer	JAE Electronics	Molex
Series	IL-G	KK250, 5046
Connector Type	Header	Header
Contact Type	Male Pin	Male Pin
Number of Positions	11	11
Number of Rows	1	1
Pitch - Mating	0.098" (2.50mm)	0.098" (2.50mm)
Style	Board to Cable/Wire	Board to Cable/Wire
Shrouding	Shrouded - 1 Wall	Shrouded - 1 Wall
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder
Fastening Type	Friction Lock	Friction Lock
Contact Length - Mating	0.157" (4.00mm)	0.295" (7.49mm)
Contact Length - Post	0.138" (4.60mm)	0.134" (3.40mm)
Insulation Height	0.236" (6.00mm)	0.248" (6.30mm)
Contact Shape	Square	Square
Contact Finish - Mating	Tin	Tin
Contact Material	Brass	Brass
Insulation Material	Polyamide (PA66), Nylon 6/6	Polyamide (PA), Nylon
Material Flammability Rating	UL94 V-0	UL94 V-0
Insulation Color	Brown	Natural
Current Rating (Amps)	3A per Contact	Not specified
Operating Temperature	-40°C ~ 85°C	Not specified
Product Status	Active	Active
RoHS Status	RoHS Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)
ECCN	EAR99	EAR99
HTSUS	8536.69.4040	8536.69.4040

Engineering Selection Recommendations

Both the IL-G-11P-S3L2-SA and the Molex 0022051112 are active production parts with equivalent regulatory compliance. The JAE Electronics IL-G-11P-S3L2-SA carries RoHS compliance certification, while the Molex 0022051112 carries ROHS3 compliance, both meeting current environmental standards. Both parts are classified as EAR99 and share the same HTSUS code, confirming their functional equivalence for rectangular connector applications.

Selection between these parts should be based on availability, supply chain requirements, and design documentation specifications. The Molex part offers an alternative sourcing channel with 1061 units in stock, while the JAE part maintains 1121 units in inventory. Both connectors are rated for unlimited moisture sensitivity and maintain UL94 V-0 flammability ratings suitable for industrial and commercial applications.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0022051112 be used as a direct replacement for the IL-G-11P-S3L2-SA?

A: Yes. Both connectors share identical critical specifications: 11-position, 2.5mm pitch, through-hole right-angle mounting, shrouded 1-wall design, solder termination, and friction lock fastening. Both use brass contacts with tin finish and polyamide/nylon insulation rated UL94 V-0.

Q: What are the differences between these two connectors?

A: The primary differences are contact length at mating (4.00mm vs. 7.49mm), insulation height (6.00mm vs. 6.30mm), and insulation color (brown vs. natural). The Molex part does not specify current rating or operating temperature in the provided data, while the JAE part specifies 3A per contact and -40°C to 85°C operation.

Q: Are there any compatibility concerns with PCB layout or mating connectors?

A: The 2.5mm pitch and 11-position configuration are standardized across both parts. Mating connectors designed for 2.5mm pitch rectangular connectors will interface with either part. Verify that existing mating connectors are compatible with the specific contact length and insulation height of the selected substitute.

Q: Do both parts meet RoHS requirements?

A: Yes. The IL-G-11P-S3L2-SA is RoHS Compliant, and the Molex 0022051112 is ROHS3 Compliant. Both meet current environmental regulations for electronic components.

Q: What is the moisture sensitivity level for these connectors?

A: Both connectors are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage, handling, or assembly processes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message