IL-FPR-10S-HF-N1 Equivalent & Substitute Parts

Part Overview

The IL-FPR-10S-HF-N1 is a 10-position FPC (Flat Flexible Connector) manufactured by JAE Electronics, designed for surface mount, right-angle applications with 0.5mm pitch contacts. This connector features zero insertion force (ZIF) operation, bottom contact configuration, and solder termination suitable for compact electronic assemblies requiring flexible cable interconnection.

The IL-FPR-10S-HF-N1 is classified as obsolete. Equivalent and substitute parts are necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for applications utilizing this connector footprint and electrical interface.

Substiute Parts

IL-FPR-10S-HF-N1

JAE ElectronicsIn Stock: 1076IL-FPR-10S-HF-N1 Datasheet

Current PartRFQ

046240010006800+

KYOCERA AVXIn Stock: 947046240010006800+ Datasheet

SimilarRFQ

68711014522

Würth ElektronikIn Stock: 321368711014522 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the IL-FPR-10S-HF-N1 are qualified based on the following critical parameters that determine functional and mechanical compatibility:

Primary Compatibility Criteria:

• 10-position connector with 0.5mm pitch
• Surface mount, right-angle mounting configuration
• Bottom contact arrangement
• Solder termination
• 50V voltage rating
• 0.30mm FFC/FCB thickness
• Zero insertion force (ZIF) operation
• Operating temperature range encompassing -40°C to 85°C
• Tapered cable end type

The two substitute parts listed—046240010006800+ (KYOCERA AVX) and 68711014522 (Würth Elektronik)—meet these core electrical and mechanical parameters, enabling direct substitution in applications designed for the IL-FPR-10S-HF-N1.

Parameter Comparison

Engineering Selection Recommendations

046240010006800+ (KYOCERA AVX): This substitute is active in production and ROHS3 compliant. The connector meets all core electrical and mechanical parameters. The current rating of 0.4A per contact is lower than the original 0.5A specification; applications requiring the full 0.5A per contact should account for this limitation. The flip lock mechanism differs from the slide lock of the original part but provides equivalent mechanical retention. Material flammability rating is not specified for this part.

68711014522 (Würth Elektronik): This substitute is active in production and ROHS3 compliant with UL94 V-0 flammability rating, matching the original specification. The connector maintains the slide lock mechanism and 0.5A per contact current rating, providing the closest electrical and mechanical alignment to the IL-FPR-10S-HF-N1. The operating temperature minimum is -25°C, which is higher than the original -40°C specification; applications requiring operation below -25°C should not use this substitute. The part includes documented mating cycle specification (25 cycles).

Frequently Asked Questions (FAQ)

Q: Can the 046240010006800+ be used as a direct replacement for the IL-FPR-10S-HF-N1?

A: The 046240010006800+ meets the core electrical and mechanical compatibility criteria for 10-position, 0.5mm pitch FPC connectors with surface mount, right-angle configuration. However, the reduced current rating of 0.4A per contact (versus 0.5A) must be evaluated against application requirements. The flip lock mechanism is functionally equivalent to the slide lock but represents a design variation.

Q: What are the key differences between the two substitute parts?

A: The 68711014522 maintains closer alignment to the original IL-FPR-10S-HF-N1 specifications, including the slide lock mechanism, 0.5A current rating, and UL94 V-0 flammability rating. The 046240010006800+ offers lower current rating (0.4A) and flip lock mechanism but includes solder retention features. Both meet the 50V voltage rating and 0.30mm FFC thickness requirements.

Q: Are there temperature range limitations with the substitute parts?

A: The 68711014522 operates from -25°C to 85°C, which is higher than the original -40°C minimum. Applications requiring operation below -25°C must use the IL-FPR-10S-HF-N1 or 046240010006800+ (which maintains -40°C to 85°C range). The 046240010006800+ supports the full -40°C to 85°C range.

Q: What is the impact of different contact finish materials?

A: The IL-FPR-10S-HF-N1 uses gold contact finish, while the substitutes use tin copper (046240010006800+) and tin (68711014522). Contact finish affects corrosion resistance and solderability. Applications with specific contact finish requirements should evaluate compatibility with the substitute materials.

Q: Are the substitute parts RoHS compliant?

A: Both substitute parts are ROHS3 compliant. The original IL-FPR-10S-HF-N1 RoHS status is not specified in the provided data.

Q: What packaging formats are available for the substitute parts?

A: Both substitute parts are supplied in Tape & Reel (TR) packaging format, suitable for automated assembly processes.