IL 716TR13 Equivalent & Substitute Parts

Part Overview

The IL 716TR13 is a General Purpose Digital Isolator manufactured by NVE Corp/Isolation Products, part of the IsoLoop® series. This component provides galvanic isolation using Giant Magnetoresistive (GMR) technology with a 2500Vrms isolation voltage rating across 4 channels. The device operates at data rates up to 110Mbps with a common mode transient immunity of 100kV/µs, suitable for applications requiring robust signal isolation in industrial and automotive environments.

The IL 716TR13 is classified as an Active product with 793 pieces currently in stock. Identifying equivalent substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and accommodate varying compliance requirements across different manufacturing batches and procurement scenarios.

Substiute Parts

IL 716TR13

NVE Corp/Isolation ProductsIn Stock: 853IL 716TR13 Datasheet

Current PartRFQ

IL 716ETR13

NVE Corp/Isolation ProductsIn Stock: 783IL 716ETR13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the IL 716TR13 is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

• Isolation voltage: 2500Vrms
• Number of channels: 4
• Data rate: 110Mbps
• Common mode transient immunity: 100kV/µs minimum
• Supply voltage range: 3V ~ 5.5V
• Operating temperature range: -40°C ~ 100°C
• Propagation delay specifications: tpLH/tpHL maximum 15ns each
• Pulse width distortion: maximum 3ns

Mechanical Equivalence Criteria:

• Package type: 16-SOIC (0.295", 7.50mm Width)
• Mounting type: Surface Mount
• Channel configuration: 4 channels, unidirectional, 2 inputs per side

Technology Equivalence:

• Technology platform: GMR (Giant Magnetoresistive)
• Series: IsoLoop®

The IL 716ETR13 meets all electrical, mechanical, and technology equivalence criteria and is therefore classified as a parametric equivalent substitute part.

Parameter Comparison

Engineering Selection Recommendations

Both the IL 716TR13 and IL 716ETR13 are Active products from NVE Corp/Isolation Products and are electrically and mechanically equivalent across all specified parameters. The devices are functionally interchangeable in circuit applications requiring 4-channel digital isolation at 2500Vrms with 110Mbps data rates.

The primary distinction between these parts is regulatory compliance status:

IL 716TR13: RoHS non-compliant. This part is suitable for applications where RoHS compliance is not a requirement or where legacy component specifications are maintained.

IL 716ETR13: ROHS3 Compliant. This part is suitable for applications subject to RoHS3 regulations, including consumer electronics, industrial equipment sold in regulated markets, and original equipment manufacturer (OEM) designs requiring environmental compliance certification.

Both parts carry identical REACH Unaffected status, ECCN classification (5A991A), and HTSUS code (8542.39.0001), indicating equivalent regulatory treatment for export and trade purposes.

Selection between these parts should be based on the specific regulatory requirements of the end application and target market. No functional or performance differences exist between the two parts.

Frequently Asked Questions (FAQ)

Q: Are IL 716TR13 and IL 716ETR13 pin-for-pin compatible?

A: Yes. Both parts use the 16-SOIC (0.295", 7.50mm Width) package with identical pinout, channel configuration (4 channels, 2 inputs per side), and electrical specifications. Direct substitution on the printed circuit board is possible without design modification.

Q: What is the difference between IL 716TR13 and IL 716ETR13?

A: The primary difference is RoHS compliance status. IL 716TR13 is RoHS non-compliant, while IL 716ETR13 is ROHS3 Compliant. All electrical parameters, isolation voltage, data rate, common mode transient immunity, operating temperature range, and package specifications are identical.

Q: Can I substitute IL 716ETR13 for IL 716TR13 in an existing design?

A: Yes. IL 716ETR13 is a parametric equivalent substitute. All electrical and mechanical specifications match exactly. The substitution is valid from a functional and performance perspective. Verify that your application does not have specific requirements for the RoHS non-compliant version before making the substitution.

Q: Can I substitute IL 716TR13 for IL 716ETR13?

A: Yes, from a functional and electrical perspective. However, if your application or market requires RoHS3 compliance, IL 716TR13 (RoHS non-compliant) is not suitable. Confirm compliance requirements before substitution.

Q: What is the isolation voltage rating for both parts?

A: Both IL 716TR13 and IL 716ETR13 provide 2500Vrms galvanic isolation across all 4 channels, with a common mode transient immunity of 100kV/µs.

Q: Are there any differences in operating temperature range?

A: No. Both parts operate across the identical temperature range of -40°C to 100°C.

Q: What is the data rate specification for these digital isolators?

A: Both parts support data rates up to 110Mbps with propagation delays of 15ns maximum (tpLH and tpHL) and pulse width distortion of 3ns maximum.

Q: Do both parts require isolated power supplies?

A: No. Both IL 716TR13 and IL 716ETR13 are general purpose digital isolators without integrated isolated power. External isolated power supplies are required for the secondary side circuitry.

Q: What supply voltage range is supported?

A: Both parts operate with supply voltages between 3V and 5.5V, accommodating both 3.3V and 5V logic systems.

Q: Are there inventory differences between these parts?

A: Yes. IL 716TR13 has 793 pieces in stock, while IL 716ETR13 has 707 pieces in stock. Availability may vary based on current procurement status.