IL 716T Digital Isolator - Equivalent & Substitute Parts

Part Overview

The IL 716T is a general-purpose digital isolator manufactured by NVE Corp/Isolation Products, part of the IsoLoop® series. This component provides galvanic isolation using Giant Magnetoresistive (GMR) technology with a 2500Vrms isolation rating across four channels. The IL 716T is classified as an active product and is suitable for applications requiring robust isolation in industrial, automotive, and communication systems.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained, allowing for design flexibility, inventory optimization, and supply chain continuity. The primary distinction between equivalent models lies in packaging configuration and regulatory compliance status.

Substiute Parts

IL 716T

NVE Corp/Isolation ProductsIn Stock: 921IL 716T Datasheet

Current PartRFQ

IL 716TE

NVE Corp/Isolation ProductsIn Stock: 1146IL 716TE Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution between IL 716T and IL 716TE is based on strict electrical and mechanical equivalence. Both parts maintain identical core specifications:

Electrical Equivalence Criteria:

• Isolation voltage: 2500Vrms
• Channel count and configuration: 4 channels, unidirectional, 2/2 input distribution
• Data rate: 110Mbps
• Common mode transient immunity: 100kV/µs minimum
• Propagation delay: 15ns maximum (both rising and falling edges)
• Pulse width distortion: 3ns maximum
• Supply voltage range: 3V ~ 5.5V
• Operating temperature range: -40°C ~ 125°C

Mechanical Equivalence Criteria:

• Package type: 16-SOIC (0.295", 7.50mm Width)
• Mounting type: Surface Mount
• Supplier device package: 16-SOIC

Distinguishing Factor: The primary difference between IL 716T and IL 716TE is packaging configuration (tape/reel versus tube) and regulatory compliance status (RoHS non-compliant versus RoHS3 compliant). These differences do not affect electrical performance or functional compatibility in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

IL 716T Selection Criteria:

• Standard tape/reel packaging for high-volume automated assembly
• Suitable for applications where RoHS compliance is not a regulatory requirement
• ECCN classification 5A991A applies to export control considerations
• Appropriate for legacy designs or systems without RoHS mandates

IL 716TE Selection Criteria:

• Tube packaging suitable for lower-volume applications or manual assembly processes
• RoHS3 compliance required for applications subject to EU Directive 2011/65/EU or equivalent regional regulations
• ECCN classification EAR99 provides broader export flexibility
• Recommended for new designs targeting markets with mandatory RoHS compliance
• Both parts maintain identical electrical performance and functional compatibility

Functional Interchangeability: IL 716T and IL 716TE are functionally interchangeable at the circuit level. Selection between these parts should be based on packaging requirements, regulatory compliance mandates, and supply chain logistics rather than electrical performance considerations.

Frequently Asked Questions (FAQ)

Q: Can IL 716TE replace IL 716T in an existing design?

A: Yes. Both parts are electrically and mechanically equivalent. The IL 716TE can be substituted for IL 716T without circuit modifications. Verify that tube packaging (IL 716TE) is compatible with your assembly process, as the standard IL 716T uses tape/reel packaging.

Q: What is the primary difference between IL 716T and IL 716TE?

A: The primary differences are packaging format (tape/reel versus tube) and regulatory compliance status (RoHS non-compliant versus RoHS3 compliant). All electrical parameters, isolation ratings, data rates, and timing specifications are identical.

Q: Is RoHS3 compliance required for my application?

A: RoHS3 compliance is mandatory for products sold in the European Union and many other regions. If your application is subject to EU Directive 2011/65/EU or equivalent regulations, IL 716TE is the appropriate selection. For applications without RoHS mandates, IL 716T remains a valid option.

Q: Are there any performance differences between IL 716T and IL 716TE?

A: No. Both parts deliver identical electrical performance, including isolation voltage (2500Vrms), data rate (110Mbps), propagation delay (15ns maximum), and common mode transient immunity (100kV/µs minimum).

Q: What does the ECCN classification difference mean?

A: IL 716T carries ECCN 5A991A classification, while IL 716TE carries EAR99. These classifications affect export control regulations. EAR99 (IL 716TE) generally provides broader export flexibility. Consult your export compliance department for specific requirements.

Q: Can I use IL 716TE in high-volume production with automated assembly?

A: IL 716TE is packaged in tubes, which is less common for high-speed automated pick-and-place assembly compared to tape/reel format. For high-volume automated assembly, IL 716T (tape/reel) is the standard choice. IL 716TE is suitable for lower-volume or manual assembly processes.

Q: Are both parts currently in production?

A: Yes. Both IL 716T and IL 716TE are classified as active products with current manufacturing status.

Q: What is the moisture sensitivity level for these parts?

A: Both IL 716T and IL 716TE carry MSL rating 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.