IHV28EB60 Equivalent & Substitute Parts

Part Overview

The IHV28EB60 is a 60 µH unshielded inductor manufactured by Vishay Dale, rated for 28 A continuous current with a maximum DC resistance of 8.5mOhm. This through-hole radial component is designed for applications requiring fixed inductance in power conversion, filtering, and energy storage circuits. The part is currently active in inventory with 791 pieces available as new original stock. Identifying equivalent and substitute parts is essential for supply chain continuity, design flexibility, and procurement optimization when the primary part becomes unavailable or when alternative sourcing is required.

Substiute Parts

IHV28EB60

Vishay DaleIn Stock: 813IHV28EB60 Datasheet

Current PartRFQ

IHV28BZ60

Vishay DaleIn Stock: 665IHV28BZ60 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the IHV28EB60 are identified based on strict parametric equivalence within the IHV series. The substitution criteria are defined by the following key parameters:

• Inductance Value: 60 µH (exact match required)
• Current Rating: 28 A (exact match required)
• DC Resistance: 8.5mOhm Max (exact match required)
• Shielding Configuration: Unshielded (exact match required)
• Mounting Type: Through Hole (exact match required)
• Package Style: Radial, Horizontal Cylinder (exact match required)
• Operating Temperature Range: -55°C ~ 125°C (exact match required)
• Series Designation: IHV (same product family)

The IHV28BZ60 meets all parametric requirements for direct substitution with the IHV28EB60. Both parts share identical electrical specifications, mechanical dimensions, thermal ratings, and compliance certifications, making them functionally interchangeable in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

The IHV28BZ60 is a direct parametric equivalent to the IHV28EB60 and is suitable for substitution in all applications where the primary part is specified. Both components are active parts manufactured by Vishay Dale within the same IHV series, ensuring design consistency and supply chain reliability.

Selection between these parts should be based on:

• Availability: Current inventory status and lead times from authorized distributors
• Compliance Requirements: Both parts meet ROHS3 and REACH compliance standards, suitable for regulated applications
• Supply Chain Strategy: Use the IHV28BZ60 as a secondary source when IHV28EB60 availability is constrained

No performance degradation or circuit redesign is required when substituting between these parts, as all electrical, thermal, and mechanical parameters are identical.

Frequently Asked Questions (FAQ)

Q: Can the IHV28BZ60 be used as a direct replacement for the IHV28EB60?

A: Yes. The IHV28BZ60 is a parametric equivalent with identical inductance (60 µH), current rating (28 A), DC resistance (8.5mOhm Max), shielding configuration, mounting type, package dimensions, and operating temperature range. No circuit modifications are required.

Q: Are there any differences in physical dimensions between these parts?

A: No. Both the IHV28EB60 and IHV28BZ60 share identical dimensions of 1.020" diameter by 2.450" length (25.91mm x 62.23mm), ensuring compatibility with existing PCB layouts and mechanical assemblies.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are ROHS3 compliant and REACH unaffected, meeting the same regulatory requirements for use in regulated industries and applications.

Q: What is the tolerance specification for inductance?

A: Both parts have an inductance tolerance of ±10% at 1 kHz test frequency, ensuring consistent performance across the specified operating range.

Q: Are these parts suitable for high-frequency applications?

A: Both parts have a self-resonant frequency of 1.9MHz, which defines the upper frequency limit for linear inductor operation. Applications above this frequency may experience non-linear behavior.

Q: What is the maximum continuous current rating?

A: Both parts are rated for 28 A continuous current, with a maximum DC resistance of 8.5mOhm, ensuring low power dissipation in power conversion and filtering applications.