Equivalent & Substitute Parts for XP Power IHL0215S15 DC DC Converter

Part Overview

XP Power IHL0215S15 is an active, isolated module DC DC converter designed for ITE (Commercial) applications. It features a single regulated 15V output at up to 133mA, intended for through-hole mounting with a 7-SIP Module, 4 Leads package. This module accepts a 13.5V to 16.5V input, provides up to 2W output power, and offers 5.2 kV isolation. Substitution may be required for reasons such as multi-vendor sourcing, supply chain continuity, or meeting compliance and certification requirements.

Substiute Parts

IHL0215S15

XP PowerIn Stock: 919IHL0215S15 Datasheet

Current PartRFQ

MEJ2S1515SC

Murata Power Solutions Inc.In Stock: 1217MEJ2S1515SC Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for XP Power IHL0215S15 are determined by equivalence in key parameters: input voltage range, output voltage and current, power rating, isolation voltage, package type, mounting style, and operational certifications. Substitutes must be active products. Where regulatory and compliance requirements, such as RoHS status and MSL rating, are provided, substitutes are grouped by matching product certifications and supply chain specifications.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute DC DC converter parts share active status and ROHS3 compliance. The moisture sensitivity level is specified for IHL0215S15 as 1 (Unlimited) and as Not Applicable for MEJ2S1515SC. Both options are available in through-hole 7-SIP modules with 4 leads. Select substitutes where product status and compliance requirements (such as RoHS3) are matched.

Frequently Asked Questions (FAQ)

Q: What determines if a DC DC converter is a direct substitute for XP Power IHL0215S15?
A: Substitution is determined by matching input voltage range, output voltage/current, power rating, isolation voltage, package type, mounting style, and product status. Compliance with environmental standards (RoHS3) is also matched.

Q: Are the mechanical packages identical between IHL0215S15 and MEJ2S1515SC?
A: Both use the 7-SIP Module, 4 Leads package type. Dimensional variation exists; verify mechanical fit based on provided dimensions.

Q: What are the compliance and environmental differences between the substitute parts?
A: Both main and substitute parts are ROHS3 compliant. Moisture Sensitivity Level is specified as 1 (Unlimited) for IHL0215S15 and as Not Applicable for MEJ2S1515SC.

Q: Can substitute parts be used in place of the main part number for ITE (Commercial) applications?
A: Product status as “Active” and matching input/output/electrical parameters indicate suitability for direct substitution in supported applications according to provided details.

Q: What considerations exist for operating temperature and efficiency?
A: Operating temperature ranges provided are -40°C ~ 95°C for IHL0215S15 and -40°C ~ 85°C for MEJ2S1515SC. Efficiency is 83% for IHL0215S15 and 78% for MEJ2S1515SC. These parameters should match application requirements based strictly on provided characteristics.