Equivalent & Substitute Parts Reference for IHL0215D05

Part Overview

The XP Power IHL0215D05 is an isolated module DC-DC converter with dual outputs (+5V and -5V), intended for commercial ITE applications. The product is currently active, but alternate models may be required to address supply chain needs, compliance objectives, or additional certifications. Finding an alternative part is essential to ensure ongoing production and compatibility in designs utilizing the same electrical and mechanical specifications.

Substiute Parts

IHL0215D05

XP PowerIn Stock: 812IHL0215D05 Datasheet

Current PartRFQ

MEJ2D1505SC

Murata Power Solutions Inc.In Stock: 957MEJ2D1505SC Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution is determined strictly by matching specification-critical parameters. The key substitution criteria for DC-DC converter modules in this category are:

• Electrical input ranges (Voltage - Input (Min), Voltage - Input (Max))
• Output configuration (number and type of outputs, Voltage - Output 1, Voltage - Output 2, Current - Output (Max), Power (Watts))
• Isolation voltage
• Package, footprint, and mounting type
• Certification and compliance requirements (RoHS, MSL)
• Product status

Only parts that meet or exceed every parameter listed above are considered valid substitutes.

Parameter Comparison

Engineering Selection Recommendations

Both IHL0215D05 and MEJ2D1505SC are currently active products, available in stock, and carry ROHS3 compliance and EAR99 classification. Each model maintains a through-hole 7-SIP module format, supporting straightforward mechanical interchange. Both parts conform to unlimited or not applicable moisture sensitivity classifications and identical international trade status. The Murata Power Solutions MEJ2D1505SC offers an additional application qualification (medical).

Frequently Asked Questions (FAQ)

Q1: What are the essential parameters for selecting a substitute for IHL0215D05?
A1: Substitute selection for DC-DC converters in this category is based on input voltage range, output voltages and currents, isolation rating, power rating, mounting package, and compliance status.

Q2: Is the footprint for MEJ2D1505SC compatible with IHL0215D05?
A2: Both parts utilize the 7-SIP module, 5 leads through-hole package. Dimensional variations (length, width, height) are specified and should be verified with system mechanical constraints.

Q3: Do both components comply with RoHS standards?
A3: Both IHL0215D05 and MEJ2D1505SC are listed as ROHS3 Compliant.

Q4: Are there differences in operating temperature and efficiency?
A4: IHL0215D05 supports -40°C ~ 95°C, while MEJ2D1505SC supports -40°C ~ 85°C. Efficiency differs by 1% (IHL0215D05 at 79%, MEJ2D1505SC at 78%).

Q5: Can MEJ2D1505SC be substituted for IHL0215D05 based on input and output specifications?
A5: All principal input and output specifications are matched between these parts, allowing for direct substitution based on electrical parameters.