IHD3EB562L Equivalent & Substitute Parts

Part Overview

The IHD3EB562L is a 5.6 mH unshielded drum core wirewound inductor manufactured by Vishay Dale, rated for 320 mA continuous current with a maximum DC resistance of 4.24 Ohm. This through-hole axial component operates across the temperature range of -55°C to 125°C and is ROHS3 compliant. The part is currently active in production with 836 pieces available in stock. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained within the allowed parameter tolerances for this inductor category.

Substiute Parts

IHD3EB562L

Vishay DaleIn Stock: 864IHD3EB562L Datasheet

Current PartRFQ

5900-562-RC

Bourns Inc.In Stock: 20545900-562-RC Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the IHD3EB562L is determined by strict equivalence in the following parameters:

• Inductance value: 5.6 mH (exact match required)
• Current rating: 320 mA minimum continuous rating
• Core material and type: Ferrite drum core, unshielded
• Mounting configuration: Through-hole axial package
• DC resistance: Within acceptable operating limits for the application
• Physical dimensions: Compatible with axial through-hole board layouts
• Compliance certifications: ROHS3 compliance maintained

The substitute part 5900-562-RC from Bourns Inc. meets these criteria with matching inductance, current rating, core type, and mounting configuration. Variations in DC resistance (4.1 Ohm vs. 4.24 Ohm) and inductance tolerance (±10% vs. ±15%) remain within acceptable engineering margins for this component category.

Parameter Comparison

Engineering Selection Recommendations

Both the IHD3EB562L and 5900-562-RC are active production components with ROHS3 compliance and REACH unaffected status, making them suitable for current design requirements. The IHD3EB562L provides an extended operating temperature range to 125°C, while the 5900-562-RC offers lower DC resistance (4.1 Ohm vs. 4.24 Ohm) and higher saturation current (350 mA vs. 240 mA). Selection between these parts should be based on specific application requirements regarding temperature extremes and current saturation performance. Both components are available in production quantities and maintain equivalent electrical and mechanical compatibility for through-hole axial inductor applications.

Frequently Asked Questions (FAQ)

Q: Can the 5900-562-RC directly replace the IHD3EB562L in existing designs?

A: Yes, the 5900-562-RC is mechanically and electrically compatible as a substitute. Both components share identical inductance values (5.6 mH), current ratings (320 mA), core types (ferrite drum core), and axial through-hole mounting configurations. Physical dimensions are nearly identical, with only minor diameter variation (0.453" vs. 0.460").

Q: What are the key differences between these two parts?

A: The primary differences are DC resistance (4.1 Ohm vs. 4.24 Ohm), inductance tolerance (±10% vs. ±15%), saturation current (350 mA vs. 240 mA), and maximum operating temperature (105°C vs. 125°C). The 5900-562-RC exhibits lower resistance and higher saturation performance, while the IHD3EB562L supports higher temperature operation.

Q: Are both parts RoHS compliant?

A: Yes, both the IHD3EB562L and 5900-562-RC are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Q: What packaging formats are available?

A: The IHD3EB562L is supplied in bulk packaging, while the 5900-562-RC is supplied in tray packaging. Both are through-hole axial components suitable for standard PCB assembly processes.

Q: Does operating temperature range affect substitution compatibility?

A: The IHD3EB562L operates to 125°C while the 5900-562-RC operates to 105°C. Applications requiring operation above 105°C must use the IHD3EB562L. For applications within the 105°C limit, both parts are compatible.