IHD1EB822L Equivalent & Substitute Parts

Part Overview

The IHD1EB822L is an 8.2 mH unshielded drum core wirewound inductor manufactured by Vishay Dale, rated for 110 mA continuous current with a maximum DC resistance of 20.8 Ohm. This through-hole axial component operates across the temperature range of -55°C to 125°C and is ROHS3 compliant. The part is currently active in production with 777 units in stock. Substitute parts are identified when equivalent inductance values, core materials, mounting types, and electrical ratings align within acceptable tolerance ranges for the application.

Substiute Parts

IHD1EB822L

Vishay DaleIn Stock: 872IHD1EB822L Datasheet

Current PartRFQ

5800-822-RC

Bourns Inc.In Stock: 10685800-822-RC Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The 5800-822-RC from Bourns Inc. qualifies as a direct substitute based on the following alignment of critical parameters:

Inductance value matches at 8.2 mH with compatible tolerance (±10% vs ±15%). Both components use ferrite drum core wirewound construction with unshielded configuration. Mounting type and package format are identical: through-hole axial. DC resistance values are within acceptable range (19.7 Ohm vs 20.8 Ohm maximum). Current ratings differ (86 mA vs 110 mA), with the substitute rated lower; saturation current is higher on the substitute (130 mA vs 80 mA). Physical dimensions are comparable (0.275" Dia x 0.700" L vs 0.270" Dia x 0.700" L). Both components are ROHS3 compliant and carry active product status. Operating temperature range on the substitute is narrower (-55°C ~ 105°C vs -55°C ~ 125°C).

Parameter Comparison

Engineering Selection Recommendations

Both the IHD1EB822L and 5800-822-RC are active production components with ROHS3 compliance and REACH unaffected status. Selection between these parts depends on application current requirements and operating temperature constraints. The IHD1EB822L supports higher continuous current (110 mA) and extends to 125°C maximum operating temperature. The 5800-822-RC is rated for 86 mA continuous current with maximum operating temperature of 105°C. DC resistance values are comparable, with the 5800-822-RC offering slightly lower resistance (19.7 Ohm vs 20.8 Ohm). Physical dimensions are nearly identical with minimal diameter variation (0.275" vs 0.270"). Both components maintain the same inductance value and core construction. Component selection should align with the specific current and temperature requirements of the target application.

Frequently Asked Questions (FAQ)

Q: Can the 5800-822-RC replace the IHD1EB822L in all applications?

A: The 5800-822-RC is suitable for applications where continuous current does not exceed 86 mA and operating temperature remains within -55°C to 105°C. Applications requiring the full 110 mA rating or temperatures above 105°C require the IHD1EB822L.

Q: Are the physical dimensions compatible for PCB mounting?

A: Both components use through-hole axial mounting with nearly identical length (0.700" L). Diameter difference is minimal (0.275" vs 0.270"), making them mechanically compatible for standard PCB layouts designed for either part.

Q: What is the significance of the inductance tolerance difference?

A: The IHD1EB822L carries ±15% tolerance while the 5800-822-RC carries ±10% tolerance. The tighter tolerance of the substitute may provide improved consistency in applications sensitive to inductance variation.

Q: Are both parts compliant with environmental and regulatory standards?

A: Both components are ROHS3 compliant and REACH unaffected. Both carry EAR99 ECCN classification. Regulatory compliance is equivalent between the two parts.

Q: What is the difference in saturation current between these inductors?

A: The IHD1EB822L saturates at 80 mA while the 5800-822-RC saturates at 130 mA. Higher saturation current on the substitute provides greater margin before inductance degradation occurs at elevated current levels.