IHD1EB560L Equivalent & Substitute Parts

Part Overview

The IHD1EB560L is a 56 µH unshielded drum core wirewound inductor manufactured by Vishay Dale, rated for 1.4 A continuous current with a maximum DC resistance of 130 mOhm. This through-hole axial component operates across the temperature range of -55°C to 125°C and is ROHS3 compliant. The part is currently active in production with 1114 units in stock. Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained within the specified parameter tolerances for this inductor category.

Substiute Parts

IHD1EB560L

Vishay DaleIn Stock: 1155IHD1EB560L Datasheet

Current PartRFQ

5800-560-RC

Bourns Inc.In Stock: 19915800-560-RC Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the IHD1EB560L is determined by the following critical parameters:

• Inductance Value: Must be 56 µH with tolerance compatibility
• Core Type and Shielding: Must be ferrite drum core, unshielded construction
• Mounting and Package: Must be through-hole axial configuration
• Current Rating: Substitute must support the application current requirement
• DC Resistance: Must not exceed acceptable limits for the circuit design
• Operating Temperature: Must cover or exceed the required temperature range
• Compliance: Must maintain ROHS3 and REACH compliance status

The Bourns Inc. 5800-560-RC meets these substitution criteria with equivalent inductance, core material, shielding type, and mounting configuration. Dimensional compatibility and electrical performance within acceptable parameters enable direct substitution in applications where the specified current and resistance ratings are suitable.

Parameter Comparison

Engineering Selection Recommendations

Both the IHD1EB560L and 5800-560-RC are active production components with ROHS3 compliance and REACH unaffected status, ensuring regulatory compliance for current applications.

The IHD1EB560L provides a higher continuous current rating of 1.4 A and lower maximum DC resistance of 130 mOhm, making it suitable for applications requiring higher current capacity or lower resistive losses.

The 5800-560-RC from Bourns Inc. offers tighter inductance tolerance (±10% versus ±15%) and higher saturation current (1.5 A), with a maximum operating temperature of 105°C. This part is appropriate for applications where inductance precision is prioritized and continuous current requirements do not exceed 1 A.

Selection between these parts depends on specific circuit current requirements, temperature operating limits, and tolerance specifications. Both components maintain mechanical compatibility through axial through-hole mounting with similar physical dimensions.

Frequently Asked Questions (FAQ)

Q: Can the 5800-560-RC directly replace the IHD1EB560L in all applications?

A: Direct substitution is valid only when the application current requirement does not exceed 1 A and the maximum operating temperature does not exceed 105°C. The IHD1EB560L is required for applications demanding the full 1.4 A rating or operation above 105°C.

Q: What is the significance of the inductance tolerance difference?

A: The 5800-560-RC has ±10% tolerance compared to the IHD1EB560L's ±15% tolerance. Applications requiring tighter inductance accuracy should specify the Bourns part. Both tolerances are measured at 1 kHz.

Q: Are there dimensional compatibility concerns?

A: Both parts are axial through-hole components with 0.700" length. The diameter difference (0.270" versus 0.275") is minimal and does not affect standard PCB footprint compatibility for axial inductors.

Q: How do the DC resistance values affect circuit performance?

A: The IHD1EB560L has a maximum DCR of 130 mOhm compared to 150 mOhm for the 5800-560-RC. In circuits sensitive to resistive losses, the lower DCR of the Vishay part provides reduced power dissipation.

Q: What is the difference in saturation current ratings?

A: The IHD1EB560L saturates at 970 mA while the 5800-560-RC saturates at 1.5 A. Saturation current indicates the point at which inductance begins to degrade. The Bourns part maintains inductance stability at higher current levels.

Q: Are both parts compliant with current environmental regulations?

A: Yes, both the IHD1EB560L and 5800-560-RC are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements for electronic component manufacturing and use.