IHB3EB100K Equivalent & Substitute Parts

Part Overview

The IHB3EB100K is a 10 µH unshielded wirewound inductor manufactured by Vishay Dale, rated for 14.4 A continuous current with a maximum DC resistance of 6 mOhm. This component is designed for through-hole mounting in radial, vertical cylinder configuration. The part is currently in stock with 821 pieces available as new original inventory. Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained within the specified parameter tolerances for this inductor category.

Substiute Parts

IHB3EB100K

Vishay DaleIn Stock: 874IHB3EB100K Datasheet

Current PartRFQ

1130-100K-RC

Bourns Inc.In Stock: 29311130-100K-RC Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the IHB3EB100K is determined by strict equivalence in the following critical parameters:

• Inductance Value: 10 µH (tolerance ±10%)
• DC Resistance: 6 mOhm maximum
• Shielding Type: Unshielded
• Mounting Configuration: Through hole, radial vertical cylinder
• Current Handling: Minimum 14.4 A rating required

The substitute part 1130-100K-RC from Bourns Inc. meets all these criteria. While the substitute offers a higher current rating (17 A), this represents an improvement in performance margin and does not compromise compatibility. Both parts maintain identical inductance, DC resistance specification, and physical mounting configuration.

Parameter Comparison

Engineering Selection Recommendations

The 1130-100K-RC qualifies as a direct substitute for the IHB3EB100K based on electrical and mechanical parameter equivalence. The substitute part carries active product status and meets ROHS3 compliance and REACH regulatory requirements. The higher current rating of the substitute (17 A versus 14.4 A) provides additional design margin without introducing incompatibility. Both parts maintain identical inductance value, DC resistance specification, and through-hole radial mounting configuration. Selection between these parts may be determined by availability, lead time, packaging format (bulk versus other options), or supply chain requirements.

Frequently Asked Questions (FAQ)

Q: Can the 1130-100K-RC replace the IHB3EB100K in existing designs?

A: Yes. Both inductors share identical inductance (10 µH), DC resistance (6 mOhm maximum), shielding type (unshielded), and through-hole radial mounting configuration. The substitute's higher current rating (17 A) does not create compatibility issues.

Q: What are the critical parameters for substitution in this inductor category?

A: Inductance value, DC resistance, shielding configuration, and mounting type are the primary determinants. Current rating must meet or exceed the application requirement. Both parts satisfy these criteria.

Q: Does the substitute part meet regulatory compliance?

A: The 1130-100K-RC is ROHS3 compliant and REACH unaffected. Regulatory status for the original IHB3EB100K was not provided in the reference data.

Q: Are there packaging differences between these parts?

A: The IHB3EB100K packaging format was not specified. The 1130-100K-RC is supplied in bulk packaging. Verify packaging requirements for your procurement process.

Q: What is the inductance tolerance for these parts?

A: The 1130-100K-RC specifies ±10% tolerance. Tolerance for the IHB3EB100K was not provided in the reference data.