IH4812S Equivalent & Substitute Parts

Part Overview

The XP Power IH4812S is an isolated DC-DC converter module designed for ITE (Commercial) applications, featuring two outputs of +12V and -12V at 84mA each. With an input voltage range of 43.2V to 52.8V, 2W output power, 1kV isolation, and through-hole 6-SIP package, this obsolete product is suitable for setups requiring compact, dual-voltage isolated conversion. Due to its discontinued (obsolete) status, sourcing alternative or equivalent models is necessary for maintenance, replacement, or new designs dependent on the original specifications.

Substiute Parts

IH4812S

XP PowerIn Stock: 1224IH4812S Datasheet

Current PartRFQ

TRI 3-4822

Traco PowerIn Stock: 1047TRI 3-4822 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Equivalent and substitute parts for the IH4812S DC-DC converter are identified strictly by matching the following allowed electrical and mechanical parameters:

• Isolated Module topology
• Dual outputs (+12V, -12V)
• Equal or wider input voltage range
• Output current equal or higher
• Output power equal or higher
• Equivalent or higher isolation voltage
• Suitable mounting type
• RoHS compliance

All substitutions listed meet or exceed the outlined criteria and are suitable within the original application's constraints strictly based on the parameters above.

Parameter Comparison

Engineering Selection Recommendations

The IH4812S is classified as obsolete, requiring replacement for continued support or new development. Substitution should account for product status (active vs. obsolete), compliance with ROHS3, and matching ECCN/HTSUS designations. The TRI 3-4822 satisfies all compliance requirements as specified and maintains or exceeds all regulated certifications furnished in the input. Selection between parts should remain within only these compliance and regulatory parameters.

Frequently Asked Questions (FAQ)

Q1: What are the primary parameters required for substituting the IH4812S DC-DC converter?
A1: Key substitution criteria are module type (isolated), number and type of outputs (+12V, -12V), input voltage range, maximum output current, isolation voltage, mounting type, package size, RoHS compliance, and regulatory codes (ECCN, HTSUS).

Q2: Are TRI 3-4822 and IH4812S pin-compatible or package-compatible?
A2: The IH4812S uses a 6-SIP Module, 5 Leads package, while the TRI 3-4822 uses a 24-DIP Module, 6 Leads package. Compatibility for mechanical fit depends strictly on the package outline and lead configuration as described in the parameter comparison table.

Q3: Is the TRI 3-4822 electrical equivalent to the IH4812S?
A3: Based on the provided parameters, TRI 3-4822 meets or exceeds all critical electrical specifications specified for the IH4812S, including output voltages, maximum currents, power rating, isolation, and input range.

Q4: Are approvals and RoHS compliance maintained between the replacements?
A4: Both components are ROHS3 compliant and share the ECCN EAR99 and HTSUS 8504.40.9580 classifications.

Q5: What application usage is supported based on the provided details?
A5: Both the IH4812S and TRI 3-4822 are specified for ITE (Commercial) applications per the input parameters.