IE2412SH Equivalent & Substitute Parts Reference

Part Overview

The XP Power IE2412SH is an isolated DC-DC converter module featuring a single 12V output at up to 84mA from a 21.6V to 26.4V input range, rated for 1W output power. It is supplied in a 4-SIP through-hole package, suitable for ITE (Commercial) applications. The product is active and maintained in inventory. Identifying alternative models is necessary to ensure supply continuity, design flexibility, and compatibility in the event of supplier constraints or allocation limits.

Substiute Parts

IE2412SH

XP PowerIn Stock: 1117IE2412SH Datasheet

Current PartRFQ

SMU01N-12

MEAN WELL USA Inc.In Stock: 2120SMU01N-12 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The selection of substitute or equivalent parts for the IE2412SH DC-DC converter is strictly based on alignment of key electrical and mechanical parameters, including type (isolated module), number of outputs, input voltage range, output voltage and current, power rating, voltage isolation, efficiency, package type, mounting, physical dimensions, operating temperature range, product compliance, and status. Only parts conforming to the provided values for these critical parameters are included as substitutes.

Parameter Comparison

Engineering Selection Recommendations

Both XP Power IE2412SH and MEAN WELL USA Inc. SMU01N-12 are active products with ROHS3 compliance and unlimited MSL, supporting secure long-term sourcing and standard lead-free manufacturing requirements. Product status and environmental compliance are consistent between main and substitute part numbers, meeting inventory and regulatory requirements.

Frequently Asked Questions (FAQ)

Q: What determines if SMU01N-12 is a valid substitute for IE2412SH?
A: Substitute validity is determined by matching type, number of outputs, input voltage range, output voltage and current, power rating, efficiency, isolation rating, package, mounting, status, and compliance.

Q: Are there any differences in package or mounting between IE2412SH and SMU01N-12?
A: Both parts are through-hole modules in a 4-SIP package, with similar but not identical dimensions.

Q: Do both the original and substitute parts meet RoHS and MSL requirements?
A: Yes, both are ROHS3 compliant and rated for MSL 1 (Unlimited), supporting lead-free applications and standard handling practices.

Q: Does the lower isolation voltage or efficiency of the substitute affect compatibility?
A: Parameter alignment is based strictly on provided values; compatibility should be determined by matching actual requirements to tabulated parameters.

Q: Are both parts suitable for the same application category?
A: Both parts are classified for ITE (Commercial) applications, as noted in their descriptions and parameter tables.