ICS853P022AMLF Equivalent & Substitute Parts

Part Overview

The ICS853P022AMLF is a mixed signal translator IC manufactured by Renesas Electronics Corporation, designed for unidirectional signal translation between LVCMOS/LVTTL input signals and LVPECL differential output signals. This 8-SOIC package device operates across the industrial temperature range of -40°C to 85°C and features a single circuit with two channels per circuit configuration.

The ICS853P022AMLF is classified as obsolete. Equivalent and substitute parts are necessary to maintain design continuity and ensure component availability for new production runs, repairs, and system upgrades where this original part is no longer readily available from primary sources.

Key Parameters

Parameter	Value
Translator Type	Mixed Signal
Channel Type	Unidirectional
Number of Circuits	1
Channels per Circuit	2
Input Signal	LVCMOS, LVTTL
Output Signal	LVPECL
Output Type	Differential
Operating Temperature	-40°C ~ 85°C (TA)
Package / Case	8-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution for the ICS853P022AMLF is determined by strict equivalence across the following critical parameters:

Translator Type: Mixed Signal
Channel Type: Unidirectional
Number of Circuits: 1
Channels per Circuit: 2
Input Signal Compatibility: LVCMOS, LVTTL
Output Signal Type: LVPECL
Output Configuration: Differential
Operating Temperature Range: -40°C ~ 85°C (TA)
Package: 8-SOIC (0.154", 3.90mm Width)
Mounting Type: Surface Mount

All substitute parts listed below meet these electrical and mechanical specifications. Substitution is valid only when all parameters align with the original part requirements.

Parameter Comparison

Part Number	Manufacturer	Translator Type	Channel Type	Circuits	Channels/Circuit	Input Signal	Output Signal	Output Type	Operating Temp	Package	Product Status
ICS853P022AMLF	Renesas Electronics	Mixed Signal	Unidirectional	1	2	LVCMOS, LVTTL	LVPECL	Differential	-40°C ~ 85°C	8-SOIC	Obsolete
MC100EPT22DG	onsemi	Mixed Signal	Unidirectional	1	2	LVCMOS, LVTTL	LVPECL	Differential	-40°C ~ 85°C	8-SOIC	Active
MC100EPT22DR2G	onsemi	Mixed Signal	Unidirectional	1	2	LVCMOS, LVTTL	LVPECL	Differential	-40°C ~ 85°C	8-SOIC	Active
MC100LVELT22DR2G	onsemi	Mixed Signal	Unidirectional	1	2	LVCMOS, LVTTL	LVPECL	Differential	-40°C ~ 85°C	8-SOIC	Active
SN65EPT22D	Texas Instruments	Mixed Signal	Unidirectional	1	2	LVCMOS, LVTTL	LVPECL	Differential	-40°C ~ 85°C	8-SOIC	Active
SN65EPT22DR	Texas Instruments	Mixed Signal	Unidirectional	1	2	LVCMOS, LVTTL	LVPECL	Differential	-40°C ~ 85°C	8-SOIC	Active
SY100EPT22VZG	Microchip Technology	Mixed Signal	Unidirectional	1	2	LVCMOS, LVTTL	LVPECL	Differential	-40°C ~ 85°C	8-SOIC	Active
SY100EPT22VZG-TR	Microchip Technology	Mixed Signal	Unidirectional	1	2	LVCMOS, LVTTL	LVPECL	Differential	-40°C ~ 85°C	8-SOIC	Active

Engineering Selection Recommendations

All substitute parts listed are functionally equivalent to the ICS853P022AMLF based on electrical specifications and package configuration. Selection among active alternatives should be based on the following factors:

Product Status: The original ICS853P022AMLF is obsolete. All listed substitutes are active products with confirmed ongoing availability and manufacturing support.

Compliance and Certifications: All substitute parts carry ROHS3 compliance status and REACH Unaffected designation, meeting current regulatory requirements for electronic component procurement.

Packaging Variants: Substitute parts are available in multiple packaging configurations (Tube, Tape & Reel, Cut Tape & Digi-Reel). Selection should align with production volume and assembly process requirements.

Manufacturer Options: Substitutes are available from three active manufacturers: onsemi (MC100 series), Texas Instruments (SN65 series), and Microchip Technology (SY100 series). All maintain equivalent electrical performance within the specified operating parameters.

Frequently Asked Questions (FAQ)

Q: Can I use any of these substitute parts interchangeably with the ICS853P022AMLF?

A: Yes. All listed substitute parts meet the identical electrical and mechanical specifications: mixed signal unidirectional translation, 1 circuit with 2 channels, LVCMOS/LVTTL input to LVPECL differential output, -40°C to 85°C operating range, and 8-SOIC package. Pin-to-pin compatibility is maintained across all substitutes.

Q: What is the difference between MC100EPT22DG and MC100EPT22DR2G?

A: Both parts are electrically identical. The primary difference is packaging: MC100EPT22DG is supplied in Tube packaging, while MC100EPT22DR2G is supplied in Tape & Reel (TR) format. Selection depends on production volume and assembly automation requirements.

Q: Are there differences between the onsemi MC100 series and Texas Instruments SN65 series?

A: Both series meet the same electrical specifications for this application. The MC100 series is onsemi's product line, while the SN65 series is Texas Instruments' equivalent offering. Both are active products with full manufacturing support and regulatory compliance.

Q: What does the MSL rating of 1 (Unlimited) mean for component handling?

A: MSL 1 indicates the component has unlimited shelf life and does not require special moisture control during storage or handling. This simplifies logistics and reduces component preparation requirements prior to assembly.

Q: Can I substitute the MC100LVELT22DR2G for the standard MC100EPT22DR2G?

A: Both parts are electrically equivalent for this application and meet all specified parameters. The LVELT variant represents an alternative product line from onsemi with identical functional characteristics. Selection can be based on availability and supply chain considerations.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message