ICS7152M-01 Equivalent & Substitute Parts

Part Overview

The ICS7152M-01 is a Spread Spectrum Clock Generator IC manufactured by Renesas Electronics Corporation, designed for 67MHz clock generation in 8-SOIC surface mount packaging. This component is classified as obsolete, making equivalent and substitute parts necessary for ongoing system support and new design implementations. The part generates CMOS output from a clock input with integrated Phase-Locked Loop (PLL) functionality and multiplier capability.

Substiute Parts

ICS7152M-01

Renesas Electronics CorporationIn Stock: 973ICS7152M-01 Datasheet

Current PartRFQ

7152M-01LF

Renesas Electronics CorporationIn Stock: 9517152M-01LF Datasheet

DirectRFQ

7152M-11LF

Renesas Electronics CorporationIn Stock: 7827152M-11LF Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the ICS7152M-01 is determined by strict equivalence across the following critical parameters:

• Frequency specification: 67MHz maximum output
• Output configuration: CMOS output from clock input
• PLL and multiplier functionality: Required
• Supply voltage range: 3V ~ 3.6V
• Package type: 8-SOIC (0.154", 3.90mm Width)
• Mounting type: Surface Mount
• Operating temperature range: 0°C ~ 70°C
• Input:Output ratio: 1:1
• Number of circuits: 1

The substitute parts listed below maintain identical electrical and mechanical specifications to the main part, ensuring direct functional replacement in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

The ICS7152M-01 is classified as obsolete. For new designs and ongoing system support, the 7152M-11LF is the recommended substitute due to its active product status and ROHS3 compliance certification. This part maintains all electrical and mechanical specifications identical to the main part while offering current manufacturing availability and regulatory compliance.

The 7152M-01LF provides direct functional equivalence and ROHS3 compliance but carries obsolete product status. This part is suitable for replacement applications where existing inventory must be maintained.

Selection between substitute parts should be based on product availability, supply chain requirements, and regulatory compliance mandates for the target application.

Frequently Asked Questions (FAQ)

Q: Can the 7152M-11LF directly replace the ICS7152M-01 in existing designs?

A: Yes. The 7152M-11LF maintains identical electrical specifications (67MHz frequency, CMOS output, 3V ~ 3.6V supply, 0°C ~ 70°C operating range) and mechanical compatibility (8-SOIC package, surface mount). Pin configuration and functional behavior are equivalent.

Q: What is the difference between the ICS7152M-01 and 7152M-01LF?

A: Both parts are functionally identical with matching electrical and mechanical specifications. The primary difference is RoHS compliance status: ICS7152M-01 is RoHS non-compliant, while 7152M-01LF is ROHS3 compliant. Both are classified as obsolete.

Q: Why is the 7152M-11LF preferred over 7152M-01LF?

A: The 7152M-11LF carries active product status, indicating current manufacturing and supply availability. The 7152M-01LF is obsolete. For new designs and long-term system support, the active status of 7152M-11LF provides supply chain continuity.

Q: Are there any package or pinout differences between these parts?

A: No. All three parts use identical 8-SOIC (0.154", 3.90mm Width) surface mount packaging with matching pinout and mechanical dimensions.

Q: What compliance certifications apply to these substitute parts?

A: The 7152M-01LF and 7152M-11LF are both ROHS3 compliant and REACH unaffected. The original ICS7152M-01 is RoHS non-compliant. All parts carry ECCN EAR99 classification.