ICS660GIT Video Clock Generator - Equivalent & Substitute Parts

Part Overview

The ICS660GIT is a video clock generator IC manufactured by Renesas Electronics Corporation, designed for NTSC and PAL video applications in consumer electronics. This linear device operates at 3.0V to 3.6V supply voltage and is housed in a 16-TSSOP surface mount package.

The ICS660GIT carries an obsolete product status. Locating equivalent substitute parts is necessary to support legacy system maintenance, repair operations, and continued production of devices utilizing this component. Active alternatives with identical electrical and mechanical specifications are available from the same manufacturer.

Substiute Parts

ICS660GIT

Renesas Electronics CorporationIn Stock: 1025ICS660GIT Datasheet

Current PartRFQ

660GILFT

Renesas Electronics CorporationIn Stock: 1150660GILFT Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ICS660GIT is determined by the following critical parameters:

• Electrical Compatibility: Identical voltage supply range (3.0V – 3.6V)
• Functional Equivalence: Same generator function for NTSC and PAL video standards
• Package Compatibility: Identical 16-TSSOP package with matching physical dimensions (0.173", 4.40mm Width)
• Mounting Technology: Surface mount configuration
• Manufacturer Consistency: Same manufacturer (Renesas Electronics Corporation) ensures design and pinout alignment

The substitute part 660GILFT meets all these criteria. The primary distinction is product status and packaging format, with 660GILFT available in active production status with Tape & Reel packaging.

Parameter Comparison

Engineering Selection Recommendations

660GILFT is the direct substitute for ICS660GIT based on the following factors:

• All electrical parameters are identical, including voltage supply range and functional specifications
• Package and mounting specifications are identical, ensuring direct PCB compatibility
• 660GILFT maintains active production status, providing supply chain continuity
• 660GILFT achieves ROHS3 compliance, meeting modern regulatory requirements
• Both parts share the same base product number lineage (ICS660 / 660G), confirming design equivalence

The transition from ICS660GIT to 660GILFT requires no circuit modifications or PCB redesign. The primary consideration is packaging format: 660GILFT is supplied in Tape & Reel format, which is standard for high-volume production environments.

Frequently Asked Questions (FAQ)

Q: Can 660GILFT be used as a direct replacement for ICS660GIT in existing designs?

A: Yes. All electrical, functional, and mechanical parameters are identical. No circuit modifications or PCB layout changes are required. The parts are pin-compatible and functionally equivalent.

Q: What is the difference between ICS660GIT and 660GILFT?

A: The primary differences are product status (obsolete vs. active) and packaging format (standard tube vs. Tape & Reel). Electrical and mechanical specifications are identical.

Q: Does the Tape & Reel packaging of 660GILFT affect compatibility?

A: No. Tape & Reel is a supply format used for automated assembly processes. Once the component is removed from the reel and soldered to the PCB, it functions identically to tube-packaged versions. The physical component and electrical performance are unchanged.

Q: Is RoHS compliance a functional requirement for substitution?

A: RoHS compliance is a regulatory and environmental consideration, not a functional one. 660GILFT's ROHS3 compliance makes it preferable for new designs and regions with RoHS requirements. Both parts function identically in the circuit.

Q: Are there any other substitute options besides 660GILFT?

A: Based on the provided specifications, 660GILFT is the documented substitute. Any alternative would require verification against the same critical parameters: voltage supply range, NTSC/PAL standards support, 16-TSSOP package, and surface mount configuration.

Q: Can ICS660GIT and 660GILFT be mixed in the same production batch?

A: Yes, provided the application does not have specific RoHS compliance mandates. Both parts are electrically and mechanically identical. However, for consistency and traceability, using a single part number per production run is recommended.