ICS30SN22PCM1-FB Equivalent & Substitute Parts

Part Overview

The ICS30SN22PCM1-FB is an inductive proximity sensor manufactured by Carlo Gavazzi Inc., designed for cylindrical M30 threaded mounting applications with a 22mm sensing distance. This sensor operates as a PNP-NC (normally closed) 4-wire device with stainless steel construction and comprehensive ingress protection ratings (IP67, IP68, IP69K). The product is currently classified as obsolete, making identification of functionally equivalent alternatives essential for system maintenance, repair, and component sourcing in industrial automation applications.

Substiute Parts

ICS30SN22PCM1-FB

Carlo Gavazzi Inc.In Stock: 674ICS30SN22PCM1-FB Datasheet

Current PartRFQ

ICF30L45N22M1IO

Carlo Gavazzi Inc.In Stock: 874ICF30L45N22M1IO Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ICS30SN22PCM1-FB is determined by the following critical parameters that must align between the main part and substitute candidates:

Primary Compatibility Criteria:

• Sensor Type: Inductive (fixed requirement)
• Sensing Distance: 0.866" (22mm) (fixed requirement)
• Package / Case: Cylinder, Threaded - M30 (fixed requirement)
• Shielding: Unshielded (fixed requirement)
• Material - Body: Stainless Steel (fixed requirement)
• Termination Style: Connector (fixed requirement)
• Ingress Protection: IP68, IP69K minimum (subset of original ratings)

Secondary Compatibility Considerations:

• Output Type: PNP configuration (primary part is PNP-NC; substitute may vary in NO/NC logic)
• Operating Temperature: Substitute range must encompass or closely align with original range
• Voltage Supply: Substitute voltage range must be compatible with system design

The ICF30L45N22M1IO meets the primary compatibility criteria as an active-status inductive proximity sensor with identical sensing distance, M30 cylindrical threaded housing, stainless steel construction, unshielded design, and connector termination. The substitute differs in output logic (PNP-NO versus PNP-NC) and operating temperature range, requiring circuit-level evaluation for specific applications.

Parameter Comparison

Engineering Selection Recommendations

The ICF30L45N22M1IO is classified as an active product with current manufacturing status, providing supply chain continuity for applications requiring M30 cylindrical inductive proximity sensors with 22mm sensing distance. Both parts share identical mechanical form factors, stainless steel construction, and core sensing specifications.

The primary technical distinction is the output logic configuration: the original ICS30SN22PCM1-FB operates as PNP-NC (normally closed), while the ICF30L45N22M1IO operates as PNP-NO (normally open). This difference requires evaluation of the control circuit logic to determine compatibility. Applications designed for NC logic will require circuit modification or alternative substitutes if NO logic is incompatible.

The ICF30L45N22M1IO demonstrates superior compliance status (RoHS3 Compliant, REACH Unaffected) compared to the obsolete main part, supporting long-term regulatory alignment. The operating temperature range of -40°C to 85°C is slightly reduced compared to the original -40°C to 90°C specification, which may be a limiting factor in high-temperature industrial environments.

Frequently Asked Questions (FAQ)

Q: Can the ICF30L45N22M1IO directly replace the ICS30SN22PCM1-FB without circuit modifications?

A: Direct mechanical and electrical replacement is possible only if the control circuit is designed to accept PNP-NO (normally open) output logic. The original part outputs PNP-NC (normally closed) logic. If the existing circuit expects NC behavior, output logic inversion or circuit redesign is required.

Q: Are the M30 threaded housings identical between these two sensors?

A: Yes. Both sensors feature identical Cylinder, Threaded - M30 package specifications, enabling direct mechanical installation in existing mounting fixtures without modification.

Q: What is the difference in ingress protection ratings?

A: The original ICS30SN22PCM1-FB supports IP67, IP68, and IP69K ratings. The substitute ICF30L45N22M1IO supports IP68 and IP69K. The loss of IP67 rating is not significant in most industrial applications, as IP68 and IP69K provide superior protection levels.

Q: Does the 5°C reduction in maximum operating temperature affect compatibility?

A: The ICF30L45N22M1IO maximum operating temperature is 85°C versus the original 90°C. Applications operating continuously above 85°C require evaluation of thermal performance and potential derating effects. Most industrial environments operate within this reduced range without performance impact.

Q: Are both sensors manufactured by the same company?

A: Yes. Both the ICS30SN22PCM1-FB and ICF30L45N22M1IO are manufactured by Carlo Gavazzi Inc., ensuring consistent design philosophy and quality standards across the product family.

Q: What is the significance of the ICF30L45N22M1IO being an active product?

A: Active product status indicates current manufacturing and availability through authorized distributors. The original ICS30SN22PCM1-FB is obsolete, meaning new stock is limited and future availability is not guaranteed. The active substitute ensures long-term supply chain reliability.