ICS30SN15POM1-FB Equivalent & Substitute Parts

Part Overview

The ICS30SN15POM1-FB is an inductive proximity sensor manufactured by Carlo Gavazzi Inc., designed for non-contact object detection in industrial applications. This sensor features a 15mm cylindrical form factor with M30 threaded mounting and operates across a wide voltage range of 10V to 36V. The product is currently classified as obsolete, necessitating identification of functionally equivalent alternatives for continued system support and component procurement.

Substiute Parts

ICS30SN15POM1-FB

Carlo Gavazzi Inc.In Stock: 898ICS30SN15POM1-FB Datasheet

Current PartRFQ

ICF30L45N22M1IO

Carlo Gavazzi Inc.In Stock: 874ICF30L45N22M1IO Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The ICF30L45N22M1IO qualifies as a functional substitute based on the following critical parameters:

Maintained Compatibility Parameters:

• Inductive sensor technology (same detection principle)
• PNP output configuration (compatible signal logic)
• M30 threaded cylindrical housing (mechanical interchangeability)
• Stainless steel body construction (environmental resistance equivalence)
• Connector-based termination (installation compatibility)
• Operating temperature range (-40°C ~ 85°C, identical specification)
• Ingress protection rating (IP68, IP69K subset of original IP67/IP68/IP69K)
• Manufacturer continuity (Carlo Gavazzi Inc.)

Modified Parameter:

• Sensing distance increased from 15mm to 22mm (0.866"), requiring application-level verification for detection range suitability

Unspecified Parameters in Substitute:

• Response frequency and supply voltage not provided for ICF30L45N22M1IO; these must be verified against application requirements before final selection

Parameter Comparison

Engineering Selection Recommendations

The ICF30L45N22M1IO is classified as an active product with ROHS3 compliance and REACH unaffected status, providing superior long-term availability and regulatory alignment compared to the obsolete ICS30SN15POM1-FB. Both sensors maintain identical operating temperature ranges and share mechanical compatibility through M30 threaded M30 cylindrical housings.

The primary substitution consideration is the increased sensing distance of 22mm versus the original 15mm specification. This parameter change requires application-level assessment to confirm detection range adequacy for the intended mounting geometry and target object positioning.

Both sensors maintain PNP output logic and connector-based termination, supporting direct integration into existing control circuits. Stainless steel construction ensures equivalent environmental durability across both models.

Frequently Asked Questions (FAQ)

Q: Can the ICF30L45N22M1IO directly replace the ICS30SN15POM1-FB in existing installations?

A: Mechanical and electrical compatibility is maintained through identical M30 threaded housing, PNP output configuration, and connector termination. The increased 22mm sensing distance requires verification that detection range remains adequate for the application's target object positioning and mounting clearances.

Q: What is the primary difference between these two sensors?

A: The sensing distance differs: ICS30SN15POM1-FB operates at 15mm while ICF30L45N22M1IO operates at 22mm. Both maintain identical operating temperature ranges, output logic, and mechanical form factors.

Q: Why is the original part classified as obsolete?

A: The ICS30SN15POM1-FB is listed as obsolete by the manufacturer. The ICF30L45N22M1IO is an active product offering continued availability and regulatory compliance support.

Q: Are there electrical compatibility concerns?

A: Both sensors provide PNP-NO output configuration. The original part specifies 10V ~ 36V supply voltage; the substitute part's supply voltage specification is not provided in available documentation and must be confirmed before deployment.

Q: What certifications apply to the substitute part?

A: The ICF30L45N22M1IO is ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for industrial component procurement.