ICS30SF10POM1-FB Equivalent & Substitute Parts

Part Overview

The ICS30SF10POM1-FB is an inductive proximity sensor manufactured by Carlo Gavazzi Inc., designed for non-contact object detection in industrial applications. This cylindrical M30-threaded sensor operates with PNP-NO output configuration and features a 10mm sensing distance. The product is currently classified as obsolete, making identification of compatible substitute components essential for system maintenance and component procurement.

Substiute Parts

ICS30SF10POM1-FB

Carlo Gavazzi Inc.In Stock: 1011ICS30SF10POM1-FB Datasheet

Current PartRFQ

ICF30L45F15M1IO

Carlo Gavazzi Inc.In Stock: 860ICF30L45F15M1IO Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute compatibility for the ICS30SF10POM1-FB is determined by the following critical parameters:

• Sensor Type: Inductive proximity sensing technology
• Package / Case: Cylinder, Threaded - M30 mechanical form factor
• Termination Style: Connector-based interface
• Material - Body: Stainless Steel construction
• Ingress Protection: IP67 minimum rating for sealed operation
• Operating Temperature Range: -40°C ~ 85°C compatibility
• Output Configuration: PNP-NO signal type

The identified substitute ICF30L45F15M1IO maintains mechanical and electrical compatibility through shared M30 cylindrical threading, stainless steel housing, connector termination, and overlapping ingress protection ratings. The primary functional difference is an increased sensing distance of 15mm versus the original 10mm specification.

Parameter Comparison

Engineering Selection Recommendations

The ICF30L45F15M1IO is classified as an active product with current manufacturing support, whereas the ICS30SF10POM1-FB is obsolete. Both sensors share identical mechanical mounting interfaces (M30 threaded cylinder), identical operating temperature ranges, and compatible output signaling (PNP-NO). The substitute maintains stainless steel construction and connector-based termination for direct integration into existing installations.

The primary technical distinction is the increased sensing distance specification (15mm versus 10mm). This parameter difference requires evaluation against specific application requirements. The substitute's extended sensing range may necessitate repositioning of detection targets or adjustment of sensor mounting depth to maintain equivalent detection performance.

Both components meet IP68 and IP69K ingress protection ratings, ensuring sealed operation in wet and high-pressure wash environments. The substitute's active product status ensures ongoing availability and technical support from Carlo Gavazzi Inc.

Frequently Asked Questions (FAQ)

Q: Can the ICF30L45F15M1IO directly replace the ICS30SF10POM1-FB without mechanical modification?

A: Yes. Both sensors use identical M30 threaded cylindrical packaging and connector-based termination. Direct mechanical substitution is possible without modification to mounting hardware or connector interfaces.

Q: What is the impact of the increased 15mm sensing distance on system performance?

A: The substitute sensor detects objects at a greater distance (15mm versus 10mm). Applications requiring detection at the original 10mm distance may require sensor repositioning or target adjustment to maintain equivalent detection timing and reliability.

Q: Are the electrical output signals compatible between these two sensors?

A: Both sensors provide PNP-NO output configuration. The ICS30SF10POM1-FB specifies 4-wire termination while the ICF30L45F15M1IO output type is listed as PNP-NO. Verification of wire count and signal pin assignments is necessary during integration.

Q: What are the supply voltage requirements for the substitute part?

A: The ICF30L45F15M1IO supply voltage specification is not provided in the available technical data. Confirmation of voltage compatibility with existing 10V ~ 36V power supplies is required before deployment.

Q: Why is the original ICS30SF10POM1-FB classified as obsolete?

A: Product obsolescence is determined by the manufacturer. The ICF30L45F15M1IO represents the active equivalent within Carlo Gavazzi Inc.'s current product portfolio.

Q: Are there any compliance or certification differences between these sensors?

A: Both sensors are manufactured by Carlo Gavazzi Inc. and share identical operating temperature ranges and ingress protection ratings. Specific compliance certifications (REACH, ECCN, HTSUS) should be verified for the substitute part based on application requirements.