ICS30SF10PCM1-FB Equivalent & Substitute Parts

Part Overview

The ICS30SF10PCM1-FB is an inductive proximity sensor manufactured by Carlo Gavazzi Inc., designed for industrial sensing applications with a 10mm cylindrical form factor. This sensor features PNP-NC output configuration, stainless steel construction, and operates across a wide temperature range of -40°C to 90°C. The product is classified as Obsolete, making identification of compatible substitute parts essential for system maintenance and component procurement.

Substiute Parts

ICS30SF10PCM1-FB

Carlo Gavazzi Inc.In Stock: 840ICS30SF10PCM1-FB Datasheet

Current PartRFQ

ICF30L45F15M1IO

Carlo Gavazzi Inc.In Stock: 860ICF30L45F15M1IO Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ICS30SF10PCM1-FB is based on the following critical parameters that define functional compatibility:

• Sensor Type: Inductive proximity sensing technology
• Package / Case: Cylinder, Threaded - M30 form factor
• Termination Style: Connector-based interface
• Material - Body: Stainless Steel construction
• Ingress Protection: IP67 minimum rating for sealed operation
• Indicator: LED status indication

The substitute part ICF30L45F15M1IO maintains the core inductive sensing technology, M30 cylindrical threaded housing, stainless steel construction, connector termination, and LED indicator. However, the sensing distance differs (15mm versus 10mm), output configuration changes from PNP-NC to PNP-NO, and the product status transitions from Obsolete to Active.

Parameter Comparison

Engineering Selection Recommendations

The ICF30L45F15M1IO serves as a functional substitute for the obsolete ICS30SF10PCM1-FB based on shared mechanical and electrical architecture. Both sensors employ inductive proximity technology within identical M30 cylindrical threaded housings with stainless steel construction and connector-based termination.

Selection of the substitute requires evaluation of application-specific requirements:

Sensing Distance Variance: The substitute operates at 15mm sensing distance compared to the original 10mm. Applications requiring precise 10mm detection may require circuit or mechanical redesign to accommodate the extended sensing range.

Output Logic Configuration: The original part provides PNP-NC (normally closed) output, while the substitute provides PNP-NO (normally open) output. Circuit logic and safety-critical functions must be re-evaluated for compatibility with the inverted output state.

Temperature Operating Range: The substitute operates to 85°C maximum versus the original 90°C. Applications requiring operation above 85°C cannot use this substitute without thermal management modifications.

Ingress Protection: The substitute maintains IP68 and IP69K ratings but does not include IP67 as a specified rating, though IP68 exceeds IP67 protection levels.

The substitute part carries Active product status, ensuring ongoing manufacturer support and availability.

Frequently Asked Questions (FAQ)

Q: Can the ICF30L45F15M1IO directly replace the ICS30SF10PCM1-FB without circuit modifications?

A: Direct replacement is not recommended without circuit evaluation. The output type changes from PNP-NC to PNP-NO, requiring logic inversion in control circuits. Additionally, the sensing distance increases from 10mm to 15mm, which may affect detection reliability depending on target material and positioning.

Q: What is the impact of the 5mm increase in sensing distance?

A: The substitute sensor detects targets at distances up to 15mm rather than 10mm. This extended range may cause false triggering in applications with closely spaced targets or require repositioning of the sensor relative to detection points.

Q: Are both sensors compatible with the same M30 threaded mounting?

A: Yes. Both the ICS30SF10PCM1-FB and ICF30L45F15M1IO use identical M30 cylinder threaded form factors and connector termination styles, allowing mechanical interchangeability in mounting hardware.

Q: Does the substitute meet the same ingress protection requirements?

A: The substitute provides IP68 and IP69K ratings. The original part specifies IP67, IP68, and IP69K. While IP68 exceeds IP67 protection, applications specifically requiring IP67 certification should verify compliance documentation.

Q: What is the significance of the product status change from Obsolete to Active?

A: The substitute part is in active production with ongoing manufacturer support, ensuring long-term availability and technical documentation access. The original part is obsolete and may face supply constraints.

Q: Can the operating temperature difference affect system performance?

A: The substitute operates to 85°C maximum versus the original 90°C. Applications requiring sustained operation above 85°C cannot use this substitute without thermal management or alternative component selection.