ICS30LN15PCM1-FB Equivalent & Substitute Parts

Part Overview

The ICS30LN15PCM1-FB is an inductive proximity sensor manufactured by Carlo Gavazzi Inc., designed for non-contact object detection in industrial applications. This sensor features a 15mm cylindrical form factor with M30 threaded mounting and operates across a wide voltage range of 10V to 36V. The product is classified as obsolete, necessitating identification of active alternative components that maintain functional compatibility for ongoing system support and new installations.

Substiute Parts

ICS30LN15PCM1-FB

Carlo Gavazzi Inc.In Stock: 990ICS30LN15PCM1-FB Datasheet

Current PartRFQ

ICF30L45N22M1IO

Carlo Gavazzi Inc.In Stock: 874ICF30L45N22M1IO Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ICS30LN15PCM1-FB is determined by the following critical parameters:

Mechanical Compatibility: Package form factor (Cylinder, Threaded - M30) and termination style (Connector) establish the physical mounting and connection interface requirements.

Electrical Compatibility: Sensor type (Inductive), output configuration (PNP logic family), and voltage supply range establish the signal interface and power requirements.

Environmental Compatibility: Ingress protection rating (IP67 minimum), operating temperature range, and material composition (Stainless Steel) define the operational environment constraints.

Functional Compatibility: Sensing distance and response frequency determine detection capability and application suitability.

The substitute part ICF30L45N22M1IO maintains the same mechanical mounting interface (M30 cylinder), connector termination, inductive sensor type, PNP output logic, stainless steel construction, and environmental protection ratings. However, it operates with a different sensing distance (22mm versus 15mm) and output polarity (PNP-NO versus PNP-NC), requiring circuit-level evaluation for specific applications.

Parameter Comparison

Engineering Selection Recommendations

The ICF30L45N22M1IO is an active product from Carlo Gavazzi Inc. and represents the primary substitute for the obsolete ICS30LN15PCM1-FB. Both components share identical mechanical mounting (M30 threaded cylinder), connector-based termination, stainless steel construction, and PNP output logic family.

Selection of ICF30L45N22M1IO requires evaluation of the following differences:

Sensing Distance Variance: The substitute operates at 22mm sensing distance compared to the original 15mm. Applications requiring detection at the original 15mm distance must assess whether the increased 22mm range is compatible with the target application geometry and object positioning.

Output Polarity Difference: The substitute provides PNP-NO (Normally Open) output versus the original PNP-NC (Normally Closed) configuration. Circuit logic and control system inputs must be evaluated to confirm compatibility with the inverted signal state.

Temperature Operating Range: The substitute operates to 85°C maximum versus the original 90°C. Applications operating near the upper temperature limit require confirmation that 85°C is acceptable.

Ingress Protection: The substitute maintains IP68 and IP69K ratings, with the original also supporting IP67. Both ratings exceed typical industrial environmental requirements.

The substitute part is ROHS3 compliant and maintains REACH unaffected status, consistent with the original component's regulatory classification.

Frequently Asked Questions (FAQ)

Q: Can ICF30L45N22M1IO be used as a direct replacement for ICS30LN15PCM1-FB?

A: Physical mounting and electrical interface compatibility are confirmed. However, the increased sensing distance (22mm versus 15mm) and inverted output polarity (PNP-NO versus PNP-NC) require application-specific evaluation. Direct substitution is not guaranteed without circuit and mechanical design review.

Q: What is the primary difference between these two sensors?

A: The main differences are sensing distance (15mm original versus 22mm substitute) and output logic state (NC versus NO). Both are inductive proximity sensors with M30 threaded mounting and PNP output logic family.

Q: Are the mechanical mounting interfaces identical?

A: Yes. Both components use M30 threaded cylinder form factor with connector-based termination, enabling identical mechanical installation.

Q: What compliance certifications apply to the substitute part?

A: The ICF30L45N22M1IO is ROHS3 compliant and REACH unaffected, consistent with the original component's regulatory status.

Q: Does the substitute operate across the same voltage range?

A: The original ICS30LN15PCM1-FB operates at 10V to 36V. The substitute ICF30L45N22M1IO does not specify a voltage range in available documentation. Voltage compatibility must be confirmed with the manufacturer or detailed technical specifications before implementation.

Q: What is the temperature operating range difference?

A: The original operates to 90°C maximum; the substitute operates to 85°C maximum. Applications requiring operation above 85°C are not compatible with the substitute.