ICS30LF15PCM1-FB Equivalent & Substitute Parts

Part Overview

The ICS30LF15PCM1-FB is an inductive proximity sensor manufactured by Carlo Gavazzi Inc., designed for cylindrical M30 threaded mounting applications. This sensor operates with PNP-NC (normally closed) output configuration and provides a 15mm sensing distance in an unshielded stainless steel housing. The product is classified as obsolete, making identification of compatible substitute parts essential for system maintenance and component procurement.

Substiute Parts

ICS30LF15PCM1-FB

Carlo Gavazzi Inc.In Stock: 734ICS30LF15PCM1-FB Datasheet

Current PartRFQ

ICF30L45F15M1IO

Carlo Gavazzi Inc.In Stock: 860ICF30L45F15M1IO Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ICS30LF15PCM1-FB is determined by the following critical parameters:

• Sensing Distance: 0.591" (15mm) — must remain constant for mechanical and electrical compatibility
• Package / Case: Cylinder, Threaded - M30 — ensures physical fit in existing mounting locations
• Sensor Type: Inductive — maintains functional equivalence
• Shielding: Unshielded — preserves electromagnetic characteristics
• Material - Body: Stainless Steel — maintains corrosion resistance and environmental durability
• Termination Style: Connector — ensures electrical interface compatibility
• Ingress Protection: IP67 minimum — maintains environmental sealing requirements

The ICF30L45F15M1IO qualifies as a substitute based on matching these core parameters. However, the output type differs from the original part (PNP-NO versus PNP-NC), which represents a functional change requiring circuit-level evaluation.

Parameter Comparison

Engineering Selection Recommendations

The ICF30L45F15M1IO is an active product from Carlo Gavazzi Inc. and represents the primary substitute for the obsolete ICS30LF15PCM1-FB. Both sensors share identical sensing distance, mechanical form factor, and environmental protection ratings, enabling direct physical replacement in M30 threaded mounting applications.

The critical distinction is the output logic configuration: the original part operates as PNP-NC (normally closed), while the substitute operates as PNP-NO (normally open). This functional difference requires evaluation of the downstream control circuit to determine compatibility. If the application logic depends on the NC configuration, additional circuit modifications or alternative substitutes may be necessary.

The substitute part operates across a reduced temperature range (-40°C to 85°C versus -40°C to 90°C) and omits IP67 rating while retaining IP68 and IP69K protection. These differences are minor for most industrial applications but should be confirmed against specific environmental requirements.

Frequently Asked Questions (FAQ)

Q: Can the ICF30L45F15M1IO be used as a direct drop-in replacement for the ICS30LF15PCM1-FB?

A: Physical installation is compatible due to identical M30 threaded cylinder form factor and connector termination. However, the output logic differs (PNP-NO versus PNP-NC), requiring circuit-level compatibility assessment before deployment.

Q: What is the primary difference between these two sensors?

A: The output type differs. The original ICS30LF15PCM1-FB provides PNP-NC (normally closed) output, while the ICF30L45F15M1IO provides PNP-NO (normally open) output. Both maintain the same 15mm sensing distance and M30 mechanical interface.

Q: Are there any temperature or environmental limitations with the substitute part?

A: The substitute operates to 85°C maximum (versus 90°C for the original) and does not include IP67 rating, though IP68 and IP69K ratings are retained. Confirm these specifications against your application requirements.

Q: Why is the original part listed as obsolete?

A: Product obsolescence is determined by the manufacturer. The ICF30L45F15M1IO is the active equivalent from Carlo Gavazzi Inc. and should be used for new procurements and system maintenance.

Q: What parameters must remain constant for a valid substitution?

A: Sensing distance (15mm), mechanical package (M30 cylinder), sensor type (inductive), shielding (unshielded), body material (stainless steel), termination style (connector), and minimum ingress protection (IP67) are the critical parameters defining substitution eligibility.