ICS30LF10PCM1-FB Equivalent & Substitute Parts

Part Overview

The ICS30LF10PCM1-FB is an inductive proximity sensor manufactured by Carlo Gavazzi Inc., designed for non-contact object detection in industrial applications. This cylindrical M30-threaded sensor operates with a 10mm sensing distance and provides PNP-NC output configuration. The product is classified as obsolete, making identification of compatible substitute parts essential for system maintenance and component replacement in existing installations.

Substiute Parts

ICS30LF10PCM1-FB

Carlo Gavazzi Inc.In Stock: 1150ICS30LF10PCM1-FB Datasheet

Current PartRFQ

ICF30L45F15M1IO

Carlo Gavazzi Inc.In Stock: 860ICF30L45F15M1IO Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ICS30LF10PCM1-FB are identified based on the following critical parameters that define functional compatibility:

Primary Compatibility Criteria:

• Sensor Type: Inductive (maintains detection principle)
• Package / Case: Cylinder, Threaded - M30 (ensures mechanical fit in existing installations)
• Termination Style: Connector (maintains electrical interface compatibility)
• Material - Body: Stainless Steel (preserves environmental resistance)
• Operating Temperature Range: -40°C ~ 85°C (maintains thermal operating envelope)
• Ingress Protection: IP68, IP69K minimum (ensures environmental sealing)

Secondary Consideration:

• Sensing Distance variation is permitted within the same M30 cylindrical form factor, as different detection ranges serve different application requirements while maintaining mechanical interchangeability.

The ICF30L45F15M1IO qualifies as a substitute based on these criteria, despite differences in sensing distance (15mm vs. 10mm) and output configuration (PNP-NO vs. PNP-NC).

Parameter Comparison

Engineering Selection Recommendations

The ICF30L45F15M1IO is classified as an active product, providing supply continuity for applications requiring M30 cylindrical inductive proximity sensors. Selection of this substitute requires evaluation of two key differences:

Sensing Distance Difference: The substitute operates at 15mm sensing distance compared to the original 10mm. This parameter change affects detection range and must be validated against specific application geometry and target object positioning.

Output Configuration Difference: The substitute provides PNP-NO (Normally Open) output versus the original PNP-NC (Normally Closed) configuration. This requires verification of circuit compatibility and signal logic in the control system.

Both parts maintain identical mechanical form factor (M30 threaded cylinder), operating temperature range (-40°C ~ 85°C), and environmental protection ratings (IP68, IP69K). Stainless steel construction and connector termination are preserved across both parts.

Frequently Asked Questions (FAQ)

Q: Can the ICF30L45F15M1IO directly replace the ICS30LF10PCM1-FB in existing installations?

A: Mechanical and environmental compatibility is confirmed. However, the 15mm sensing distance and PNP-NO output configuration require validation against your specific application requirements and circuit design before implementation.

Q: What is the primary reason for seeking a substitute for the ICS30LF10PCM1-FB?

A: The ICS30LF10PCM1-FB is classified as obsolete. The ICF30L45F15M1IO is an active product from the same manufacturer, ensuring ongoing availability and supply chain continuity.

Q: Are there differences in supply voltage between these parts?

A: The original part specifies 10V ~ 36V supply voltage. The substitute part does not provide voltage specification in available documentation. Verification of voltage compatibility with your power supply is required before substitution.

Q: How do the sensing distances affect application compatibility?

A: The original part detects objects at 10mm distance; the substitute detects at 15mm distance. Applications with tight spatial constraints or specific target positioning may require adjustment of sensor placement or target geometry.

Q: What is the significance of the output type difference (PNP-NC vs. PNP-NO)?

A: PNP-NC (Normally Closed) provides signal when no object is detected; PNP-NO (Normally Open) provides signal when an object is detected. Your control circuit logic must accommodate this functional difference.

Q: Are both parts available in the same packaging format?

A: Both parts use M30 threaded cylindrical packaging with connector termination. The substitute is supplied in box packaging, while the original part packaging is not specified in available data.