ICS18LF08POM1-FB Equivalent & Substitute Parts

Part Overview

The ICS18LF08POM1-FB is an inductive proximity sensor manufactured by Carlo Gavazzi Inc., designed for non-contact detection applications with an 8mm sensing distance. This cylindrical M18-threaded sensor features PNP-NO output configuration with 4-wire termination and operates across a wide voltage range of 10V to 36V. The product is classified as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity and ensure long-term component availability for new designs and field replacements.

Substiute Parts

ICS18LF08POM1-FB

Carlo Gavazzi Inc.In Stock: 856ICS18LF08POM1-FB Datasheet

Current PartRFQ

ICF18L45F08M1IO

Carlo Gavazzi Inc.In Stock: 983ICF18L45F08M1IO Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ICS18LF08POM1-FB is determined by the following critical parameters:

• Sensor Type: Must be inductive proximity sensor
• Sensing Distance: Must be 0.315" (8mm)
• Package / Case: Must be Cylinder, Threaded - M18
• Termination Style: Must be Connector
• Material - Body: Must be Stainless Steel
• Output Type: Must be PNP-NO configuration
• Ingress Protection: Must maintain IP68 or higher rating
• Operating Temperature Range: Must support minimum -40°C to 80°C operation

The ICF18L45F08M1IO meets all critical substitution criteria. While the substitute part operates at an extended upper temperature limit (-40°C ~ 85°C) and does not specify response frequency in available documentation, these variations do not preclude functional equivalence for standard industrial applications. The substitute maintains identical mechanical form factor, electrical output configuration, and environmental protection ratings required for direct replacement.

Parameter Comparison

Engineering Selection Recommendations

The ICF18L45F08M1IO is the designated manufacturer-recommended substitute for the obsolete ICS18LF08POM1-FB. Selection of the active substitute part is justified on the following engineering basis:

Product Status: The main part is classified as obsolete, while the substitute maintains active product status with Carlo Gavazzi Inc., ensuring continued availability, technical support, and compliance with current manufacturing standards.

Functional Equivalence: Both sensors maintain identical sensing distance (8mm), output configuration (PNP-NO), mechanical form factor (M18 cylinder), and environmental protection ratings (IP68, IP69K). These parameters define the functional requirements for inductive proximity detection in industrial applications.

Compliance and Certifications: The substitute part carries current REACH compliance status and maintains equivalent electrical safety characteristics. The extended operating temperature range (-40°C ~ 85°C versus -40°C ~ 80°C) provides additional operational margin without introducing compatibility concerns.

Supply Chain Continuity: With 928 units in current inventory versus 835 units of the obsolete part, the substitute ensures reliable component availability for both new system designs and field replacement requirements.

Frequently Asked Questions (FAQ)

Q: Can the ICF18L45F08M1IO be used as a direct replacement for the ICS18LF08POM1-FB?

A: Yes. Both sensors share identical sensing distance (8mm), output type (PNP-NO), mechanical package (M18 threaded cylinder), and environmental protection ratings (IP68, IP69K). The substitute is the manufacturer-recommended equivalent.

Q: What is the difference in operating temperature range?

A: The main part operates from -40°C to 80°C, while the substitute operates from -40°C to 85°C. This extended upper limit on the substitute does not affect compatibility and provides additional operational margin for high-temperature environments.

Q: Are the connector terminations compatible?

A: Both parts use connector-style termination. Mechanical and electrical compatibility is maintained for direct installation in existing harnesses and control circuits.

Q: Why is the main part classified as obsolete?

A: Product obsolescence typically reflects manufacturer discontinuation decisions based on market demand, design evolution, or series consolidation. The active substitute part represents the current equivalent offering from Carlo Gavazzi Inc.

Q: Does the substitute part maintain the same ingress protection rating?

A: The substitute maintains IP68 and IP69K ratings. The main part additionally lists IP67; however, IP68 and IP69K represent higher protection levels and are fully compatible with applications requiring IP67 performance.

Q: Is there a difference in response frequency between the two parts?

A: The main part specifies 1.5kHz response frequency. The substitute part does not provide response frequency specification in available documentation. For applications with specific frequency requirements, contact the manufacturer for detailed technical specifications.