ICO-624-SGG Equivalent & Substitute Parts

Part Overview

The ICO-624-SGG is a 24-position DIP socket manufactured by Samtec Inc., designed for through-hole mounting applications. This socket features a 0.6" (15.24mm) row spacing with gold-plated beryllium copper mating contacts and brass posts. The component is classified as Active product status with full RoHS3 compliance. Substitute parts are identified when equivalent electrical and mechanical parameters are required for component procurement, inventory management, or design flexibility across manufacturing sources.

Substiute Parts

ICO-624-SGG

Samtec Inc.In Stock: 1242ICO-624-SGG Datasheet

Current PartRFQ

110-13-624-41-001000

Mill-Max Manufacturing Corp.In Stock: 1175110-13-624-41-001000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The ICO-624-SGG socket is substitutable with the Mill-Max Manufacturing Corp. part number 110-13-624-41-001000 based on the following critical parameters:

Electrical Compatibility:

• Identical 24-position DIP configuration (2 x 12)
• Matching 0.100" (2.54mm) mating pitch
• Matching 0.100" (2.54mm) post pitch
• Gold-plated beryllium copper mating contacts in both parts
• Identical operating temperature range (-55°C ~ 125°C)

Mechanical Compatibility:

• 0.6" (15.24mm) row spacing maintained
• Through-hole solder termination in both parts
• Open frame design in both parts
• Brass-based post material (Brass vs. Brass Alloy)

Compliance & Status:

• Both parts are Active product status
• Both parts are RoHS3 compliant
• Both parts share identical ECCN (EAR99) and HTSUS codes

Parameter Comparison

Engineering Selection Recommendations

Both the ICO-624-SGG and 110-13-624-41-001000 are Active products with full RoHS3 compliance and identical ECCN/HTSUS classifications, confirming regulatory equivalence for international trade and environmental standards.

The primary electrical and mechanical parameters are identical across both parts: 24-position DIP configuration, 0.100" (2.54mm) pitch, 0.6" (15.24mm) row spacing, gold-plated beryllium copper mating contacts, and -55°C ~ 125°C operating temperature range. Both parts utilize through-hole solder termination and open frame design.

The Mill-Max part (110-13-624-41-001000) provides a higher current rating of 3 A compared to the Samtec part's 1 A rating. The post contact material differs slightly (Brass Alloy vs. Brass), and the Mill-Max part specifies a termination post length of 0.125" (3.18mm). The Samtec part carries a UL94 V-0 flammability rating, while the Mill-Max part does not specify this parameter.

Selection between these parts depends on application-specific current requirements and PCB design constraints related to post length specifications.

Frequently Asked Questions (FAQ)

Q: Can the 110-13-624-41-001000 directly replace the ICO-624-SGG in existing designs?

A: Yes, for applications requiring 1 A or less. Both parts share identical 24-position DIP configuration, 0.100" (2.54mm) pitch, 0.6" (15.24mm) row spacing, and gold-plated beryllium copper mating contacts. Verify PCB hole spacing and termination post length (0.125" specified for Mill-Max part) compatibility with your board design.

Q: What are the key electrical parameters that determine substitutability?

A: The critical parameters are: number of positions (24), mating pitch (0.100"), post pitch (0.100"), row spacing (0.6"), contact material (beryllium copper), contact finish (gold), and operating temperature range (-55°C ~ 125°C). Both parts meet these specifications identically.

Q: Are there compliance differences between these parts?

A: Both parts are RoHS3 compliant and share identical ECCN (EAR99) and HTSUS (8536.69.4040) codes. The Samtec part specifies UL94 V-0 flammability rating; the Mill-Max part does not provide this specification. Verify flammability requirements for your application.

Q: What is the difference in current rating between these parts?

A: The ICO-624-SGG is rated for 1 A, while the 110-13-624-41-001000 is rated for 3 A. If your application requires current handling above 1 A, the Mill-Max part provides higher capacity.

Q: Are the post materials functionally equivalent?

A: Both parts use brass-based post materials (Brass vs. Brass Alloy). For standard through-hole solder applications, these materials are functionally equivalent. Verify specific material requirements if your application involves specialized soldering processes or environmental conditions.

Q: What packaging format is used for both parts?

A: Both the ICO-624-SGG and 110-13-624-41-001000 are supplied in tube packaging, suitable for automated pick-and-place assembly and manual component handling.