ICO-314-LGT Equivalent & Substitute Parts

Part Overview

The ICO-314-LGT is a 14-position DIP socket manufactured by Samtec Inc., designed for through-hole mounting applications requiring gold-plated mating contacts. This socket accommodates dual inline package (DIP) integrated circuits with 0.3" (7.62mm) row spacing and 0.100" (2.54mm) pitch. The component is classified as Active product status with full RoHS3 compliance. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling component procurement flexibility while maintaining circuit performance and reliability standards.

Substiute Parts

ICO-314-LGT

Samtec Inc.In Stock: 799ICO-314-LGT Datasheet

Current PartRFQ

115-93-314-41-001000

Mill-Max Manufacturing Corp.In Stock: 1458115-93-314-41-001000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ICO-314-LGT is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Type: DIP, 0.3" (7.62mm) Row Spacing
• Number of Positions: 14 (2 x 7)
• Pitch - Mating: 0.100" (2.54mm)
• Contact Finish - Mating: Gold
• Contact Material - Mating: Beryllium Copper
• Mounting Type: Through Hole
• Termination: Solder
• Operating Temperature Range: -55°C ~ 125°C

The substitute part 115-93-314-41-001000 (Mill-Max Manufacturing Corp.) satisfies all mandatory matching parameters, establishing functional and mechanical compatibility for direct substitution in DIP socket applications.

Parameter Comparison

Engineering Selection Recommendations

ICO-314-LGT (Samtec Inc.):

• Active product status with full RoHS3 compliance
• UL94 V-0 material flammability rating
• Contact resistance specification: 10mOhm
• Current rating: 1 A
• Suitable for applications requiring documented compliance certifications

115-93-314-41-001000 (Mill-Max Manufacturing Corp.):

• Active product status with RoHS non-compliant designation
• Current rating: 3 A (higher current capacity than primary part)
• Moisture Sensitivity Level (MSL): 1 (Unlimited)
• REACH Status: REACH Unaffected
• Suitable for applications where higher current capacity is required and RoHS3 compliance is not mandated

Selection between these parts depends on regulatory compliance requirements and application current specifications. Both parts maintain identical mechanical and electrical interface parameters for DIP socket functionality.

Frequently Asked Questions (FAQ)

Q: Can 115-93-314-41-001000 directly replace ICO-314-LGT in existing designs?

A: Yes, for applications where RoHS3 compliance is not required. Both parts share identical DIP socket geometry (14 positions, 0.3" row spacing, 0.100" pitch), gold-plated beryllium copper mating contacts, and operating temperature range (-55°C ~ 125°C). The Mill-Max part provides higher current capacity (3 A vs. 1 A).

Q: What are the compliance differences between these parts?

A: ICO-314-LGT is RoHS3 compliant with UL94 V-0 flammability rating. The 115-93-314-41-001000 is RoHS non-compliant but REACH unaffected. Design specifications must determine which compliance status is required.

Q: Are the contact materials equivalent?

A: Both parts use beryllium copper for mating contacts with identical 30.0µin (0.76µm) gold plating thickness. Post materials differ slightly (Brass vs. Brass Alloy), but both are functionally equivalent for solder termination applications.

Q: What is the significance of the current rating difference?

A: The Mill-Max part supports 3 A versus 1 A for the Samtec part. Applications requiring current levels between 1 A and 3 A must use the 115-93-314-41-001000. Applications limited to 1 A or below can use either part.

Q: Are packaging and inventory considerations relevant to substitution?

A: Both parts are supplied in tube packaging. Inventory availability differs (736 Pcs for ICO-314-LGT; 1405 Pcs for 115-93-314-41-001000). Substitution decisions should account for supply chain requirements and lead time considerations.