ICM7217CIPI Equivalent & Substitute Parts

Part Overview

The ICM7217CIPI is a 4-digit up/down counter IC operating at 2MHz, manufactured by Analog Devices Inc./Maxim Integrated. This component is classified as a Clock/Timing device in the 28-DIP package format. The ICM7217CIPI is currently listed as obsolete, which necessitates identification of functionally equivalent substitute parts for ongoing design requirements and component procurement.

Substiute Parts

ICM7217CIPI

Analog Devices Inc./Maxim IntegratedIn Stock: 1318ICM7217CIPI Datasheet

Current PartRFQ

ICM7217CIPI+

Analog Devices Inc./Maxim IntegratedIn Stock: 915ICM7217CIPI+ Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ICM7217CIPI is determined by strict equivalence across the following critical parameters:

• Functional Type: 4-digit up/down counter architecture
• Frequency Rating: 2MHz operation
• Supply Voltage Range: 4.5V to 5.5V compatibility
• Supply Current: 100 mA maximum
• Operating Temperature Range: -20°C to 85°C
• Package Format: 28-DIP (0.600", 15.24mm)
• Mounting Technology: Through-hole configuration
• Base Product Number: ICM7217 series

The ICM7217CIPI+ qualifies as a direct substitute based on identical electrical specifications and mechanical compatibility across all parameters listed above.

Parameter Comparison

Engineering Selection Recommendations

The ICM7217CIPI+ is the direct equivalent substitute for the obsolete ICM7217CIPI. Both parts maintain identical electrical and mechanical specifications, ensuring pin-for-pin compatibility and functional interchangeability in circuit applications.

The primary distinction between these parts is product status and regulatory compliance. The ICM7217CIPI+ is currently in active production status, whereas the ICM7217CIPI is obsolete. Additionally, the ICM7217CIPI+ achieves ROHS3 compliance, while the original ICM7217CIPI does not meet RoHS requirements. For new designs or component replenishment, the ICM7217CIPI+ is the appropriate selection.

Frequently Asked Questions (FAQ)

Q: Can the ICM7217CIPI+ directly replace the ICM7217CIPI in existing designs?

A: Yes. The ICM7217CIPI+ is electrically and mechanically identical to the ICM7217CIPI. Both parts share the same pin configuration, voltage specifications, frequency rating, and 28-DIP package format. Direct substitution is supported without circuit modification.

Q: What is the difference between ICM7217CIPI and ICM7217CIPI+?

A: The primary differences are product status and compliance certification. The ICM7217CIPI is obsolete, while the ICM7217CIPI+ is in active production. The ICM7217CIPI+ meets ROHS3 compliance standards, whereas the ICM7217CIPI does not. Electrical and mechanical specifications are identical.

Q: Are there packaging differences between these parts?

A: Both parts use the 28-DIP (0.600", 15.24mm) package with through-hole mounting. The ICM7217CIPI+ is supplied in tube packaging, while the original ICM7217CIPI packaging format is not specified. The physical component dimensions and pin layout are identical.

Q: What supply voltage range is required for operation?

A: Both the ICM7217CIPI and ICM7217CIPI+ operate within a supply voltage range of 4.5V to 5.5V, with a maximum supply current of 100 mA.

Q: What is the operating temperature range for these components?

A: Both parts operate across a temperature range of -20°C to 85°C, suitable for industrial and commercial applications.