ICL7137CPL+ Equivalent & Substitute Parts

Part Overview

The ICL7137CPL+ is a display driver integrated circuit designed for 4.6-digit display applications. Manufactured by Analog Devices Inc./Maxim Integrated, this component operates as a single-channel display driver with a 40-pin DIP package configuration. The part is currently in active production status with 2000 units available in new original stock. Finding equivalent or substitute parts may be necessary for supply chain continuity, design flexibility, or specific application requirements where alternative sourcing is beneficial.

Substiute Parts

ICL7137CPL+

Analog Devices Inc./Maxim IntegratedIn Stock: 2100ICL7137CPL+ Datasheet

Current PartRFQ

ICL7137CPL+

Analog Devices Inc./Maxim IntegratedIn Stock: 2100ICL7137CPL+ Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the ICL7137CPL+ is determined by strict alignment with the following critical parameters:

• Display resolution capability: 4.6-digit format
• Package configuration: 40-pin DIP with 0.600" (15.24mm) body width
• Mounting technology: Through-hole assembly
• Supply architecture: Single supply voltage operation
• Operating temperature specification: 0°C to 70°C range
• Compliance certifications: ROHS3 compliance and MSL Level 1 rating

Based on the provided substitute list, the ICL7137CPL+ represents the direct equivalent part. No alternative part numbers have been specified in the substitute list beyond the primary part number itself.

Parameter Comparison

Engineering Selection Recommendations

The ICL7137CPL+ maintains active production status with confirmed inventory availability. The component carries ROHS3 compliance certification and MSL Level 1 rating, indicating full compliance with current environmental and reliability standards. The part is suitable for applications requiring 4.6-digit display driver functionality in through-hole PCB assemblies operating within the 0°C to 70°C temperature range. Selection of this part is supported by its active status and established compliance documentation.

Frequently Asked Questions (FAQ)

What defines a valid substitute for the ICL7137CPL+?

A valid substitute must maintain identical specifications for display resolution (4.6-digit), package configuration (40-pin DIP), mounting type (through-hole), supply architecture (single supply), and operating temperature range (0°C to 70°C). Compliance certifications including ROHS3 status must be equivalent or superior.

Can the ICL7137CPL+ be used in surface-mount applications?

No. The ICL7137CPL+ is specified for through-hole mounting only with a 40-DIP package. Surface-mount alternatives would require a different package designation and are not covered under this part's specifications.

What is the significance of the MSL Level 1 rating?

MSL Level 1 indicates unlimited moisture sensitivity level, meaning the component has no moisture-related storage or handling restrictions. This simplifies inventory management and reduces risk of moisture-induced failures during standard storage conditions.

Is the ICL7137CPL+ suitable for industrial temperature applications?

The operating temperature range is specified as 0°C to 70°C. Applications requiring extended temperature ranges beyond this specification would require alternative components with different thermal ratings.

What compliance standards apply to the ICL7137CPL+?

The component is ROHS3 compliant and REACH unaffected. These certifications confirm compliance with European environmental directives and hazardous substance restrictions applicable to electronic components.