ICL7107CPLZ Equivalent & Substitute Parts

Part Overview

The ICL7107CPLZ is a display driver IC designed for 4.6-digit digital readout applications. Manufactured by Renesas Electronics Corporation, this component operates on a single 5V supply and is housed in a 40-pin DIP package. The device is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating. Equivalent and substitute parts are identified when identical functional specifications, electrical parameters, and mechanical compatibility are maintained across the same package and pin configuration.

Substiute Parts

ICL7107CPLZ

Renesas Electronics CorporationIn Stock: 2298ICL7107CPLZ Datasheet

Current PartRFQ

ICL7107CPL+

Analog Devices Inc./Maxim IntegratedIn Stock: 1433ICL7107CPL+ Datasheet

DirectRFQ

ICL7137CPL+

Analog Devices Inc./Maxim IntegratedIn Stock: 2100ICL7137CPL+ Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ICL7107CPLZ is determined by the following critical parameters:

Primary Substitution Criteria:

• Package compatibility: 40-DIP (0.600", 15.24mm) form factor
• Resolution specification: 4.6-digit display driver functionality
• Voltage supply: 5V single supply operation
• Operating temperature range: 0°C ~ 70°C
• Mounting method: Through-hole configuration
• Regulatory compliance: RoHS3 and REACH status

Identified Substitutes:

The ICL7107CPL+ and ICL7137CPL+ meet the core mechanical and electrical compatibility requirements. Both parts maintain identical package specifications, resolution ratings, voltage supply parameters, and operating temperature ranges. All substitute parts share Active product status and equivalent compliance certifications (RoHS3 Compliant, REACH Unaffected).

Parameter Comparison

Engineering Selection Recommendations

ICL7107CPL+ (Analog Devices Inc./Maxim Integrated): This substitute maintains full electrical and mechanical compatibility with the ICL7107CPLZ. Both parts share identical package specifications, resolution ratings, and operating parameters. The ICL7107CPL+ carries Active product status with RoHS3 compliance and unlimited MSL rating, meeting all regulatory requirements equivalent to the main part. Selection of this substitute is appropriate for direct replacement in existing designs.

ICL7137CPL+ (Analog Devices Inc./Maxim Integrated): This part meets all mechanical compatibility requirements and maintains the 4.6-digit resolution specification within the same 40-DIP package. Operating temperature range and compliance certifications are equivalent to the main part. The voltage supply parameter is not specified in available data; design verification is necessary to confirm 5V operation compatibility before implementation.

Both substitute parts are manufactured by Analog Devices Inc./Maxim Integrated and carry Active product status with full RoHS3 compliance and REACH unaffected designation, ensuring regulatory alignment with the original ICL7107CPLZ specification.

Frequently Asked Questions (FAQ)

Q: What determines if a part can substitute for the ICL7107CPLZ?

A: Substitution is based on matching the following parameters: 40-DIP package form factor, 4.6-digit display driver functionality, 5V single supply operation, 0°C to 70°C operating temperature range, through-hole mounting, and equivalent RoHS3/REACH compliance status.

Q: Can ICL7107CPL+ replace ICL7107CPLZ in all applications?

A: Yes. Both parts share identical electrical specifications, package configuration, and regulatory compliance. The ICL7107CPL+ is a direct functional equivalent with Active product status.

Q: What is the difference between ICL7107CPL+ and ICL7137CPL+?

A: Both parts maintain identical package specifications and 4.6-digit resolution. The primary difference is the number of channels: ICL7107CPL+ specifies 1 channel while ICL7107CPLZ specifies 2 channels. Additionally, the voltage supply specification for ICL7137CPL+ is not provided in available documentation.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. Both ICL7107CPL+ and ICL7137CPL+ carry RoHS3 compliance certification and REACH unaffected status, matching the regulatory requirements of the ICL7107CPLZ.

Q: What is the MSL rating for substitute parts?

A: Both substitute parts carry MSL rating 1 (Unlimited), identical to the main part specification.

Q: Can these parts be used interchangeably in PCB designs?

A: Yes, from a mechanical and package perspective. All parts use the 40-DIP (0.600", 15.24mm) package with through-hole mounting. Pin compatibility should be verified against specific application schematics.