ICA-314-WGT DIP Socket Equivalent & Substitute Parts

Part Overview

The ICA-314-WGT is a 14-position DIP socket manufactured by Samtec Inc., designed for through-hole mounting applications requiring gold-plated mating contacts. This socket accommodates 14-pin dual inline package (DIP) integrated circuits with 0.3" row spacing and 0.100" pitch. The part is currently in active production status with 789 units available in inventory.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across critical specifications including pin count, pitch, row spacing, contact finish, mounting type, and operating temperature range. Identifying qualified substitutes ensures design flexibility and supply chain continuity.

Substiute Parts

ICA-314-WGT

Samtec Inc.In Stock: 811ICA-314-WGT Datasheet

Current PartRFQ

123-93-314-41-001000

Mill-Max Manufacturing Corp.In Stock: 1092123-93-314-41-001000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The ICA-314-WGT qualifies 123-93-314-41-001000 (Mill-Max Manufacturing Corp.) as a substitute based on the following critical parameters:

Matching Parameters:

• Number of Positions: 14 (2 x 7)
• DIP Type: 0.3" (7.62mm) Row Spacing
• Pitch - Mating: 0.100" (2.54mm)
• Contact Finish - Mating: Gold
• Contact Material - Mating: Beryllium Copper
• Mounting Type: Through Hole
• Operating Temperature Range: -55°C ~ 125°C
• Pitch - Post: 0.100" (2.54mm)

These parameters define the physical and electrical compatibility required for direct substitution in DIP socket applications. Both parts maintain identical pin configuration, spacing, and thermal operating envelope.

Parameter Comparison

Engineering Selection Recommendations

ICA-314-WGT Selection Criteria:

• Required when ROHS3 compliance is mandatory for the end application
• Suitable for applications with current requirements up to 1 A per contact
• Solder termination specified for wave or reflow soldering processes
• Tin post finish appropriate for standard PCB assembly

123-93-314-41-001000 Selection Criteria:

• Applicable when higher current capacity (3 A per contact) is required
• Wire wrap termination specified for manual or automated wire wrap assembly
• Longer termination post length (0.510") accommodates deeper PCB mounting
• RoHS non-compliant status requires verification against application regulatory requirements
• Moisture Sensitivity Level 1 indicates unlimited shelf life without desiccant packaging

Both parts maintain active production status and identical pin configuration, row spacing, and operating temperature range. Selection between these substitutes depends on termination method, current requirements, and regulatory compliance specifications of the target application.

Frequently Asked Questions (FAQ)

Q: Can 123-93-314-41-001000 directly replace ICA-314-WGT on existing PCBs?

A: Direct replacement on existing PCBs designed for solder termination is not recommended. The ICA-314-WGT features solder termination with 0.100" post pitch, while 123-93-314-41-001000 is designed for wire wrap termination with a longer post length (0.510"). PCB pad patterns and hole depths differ between these termination methods. Substitution requires PCB redesign or manual rework.

Q: What are the key electrical compatibility factors?

A: Both parts maintain identical mating contact specifications: 14-position DIP configuration, 0.100" pitch, 0.3" row spacing, gold-plated beryllium copper contacts, and -55°C to 125°C operating temperature. The primary electrical difference is current rating: ICA-314-WGT rated at 1 A per contact versus 123-93-314-41-001000 at 3 A per contact.

Q: Does RoHS compliance affect substitution decisions?

A: Yes. ICA-314-WGT is ROHS3 compliant, while 123-93-314-41-001000 is RoHS non-compliant. Applications subject to RoHS regulations must use ICA-314-WGT or identify alternative compliant substitutes. Non-compliant parts may be restricted in certain markets or end-use applications.

Q: Are the housing materials interchangeable?

A: Both parts use polyester-based housing materials. ICA-314-WGT specifies polyester with glass filler, while 123-93-314-41-001000 uses polycyclohexylenedimethylene terephthalate (PCT) polyester. Both materials provide UL94 V-0 or equivalent flammability ratings and are suitable for standard through-hole PCB applications.

Q: What termination method should be selected?

A: Termination method depends on assembly process. ICA-314-WGT with solder termination is standard for wave or reflow soldering. 123-93-314-41-001000 with wire wrap termination is specified for manual or automated wire wrap assembly. These methods are not interchangeable without PCB redesign.