IBR3SAD200 Equivalent & Substitute Parts

Part Overview

The IBR3SAD200 is an APEM Inc. pushbutton switch featuring SPST-NO (Single Pole Single Throw - Normally Open) circuit configuration with 0.4A AC and 0.1A DC current ratings at 32V AC / 50V DC. This panel-mount, snap-in switch operates with an off-momentary function and is rated for 1,000,000 mechanical cycles and 500,000 electrical cycles. The part is Active status and ROHS3 compliant. Equivalent and substitute parts are identified based on identical electrical specifications, mechanical mounting compatibility, and operational parameters.

Substiute Parts

IBR3SAD200

APEM Inc.In Stock: 859IBR3SAD200 Datasheet

Current PartRFQ

IBR3SAD100

APEM Inc.In Stock: 1114IBR3SAD100 Datasheet

SimilarRFQ

IBR3SAD300

APEM Inc.In Stock: 1196IBR3SAD300 Datasheet

SimilarRFQ

IBR3SAD900

APEM Inc.In Stock: 973IBR3SAD900 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for IBR3SAD200 are qualified based on identical electrical and mechanical parameters. All substitute parts maintain the same SPST-NO circuit configuration, current ratings (400mA AC / 100mA DC), voltage ratings (32V AC / 50V DC), switch function (Off-Mom), mounting type (Panel Mount, Snap-In), panel cutout dimensions (13.60mm circular), termination style (Solder Lug), ingress protection rating (IP54), operating temperature range (-40°C to 85°C), mechanical life (1,000,000 cycles), and electrical life (500,000 cycles). All substitute parts share the same base product number (IBR3SAD) and are manufactured by APEM Inc. The only variation among substitute parts is the actuator cap color, which does not affect electrical or mechanical compatibility. All parts are Active status and ROHS3 compliant.

Parameter Comparison

Engineering Selection Recommendations

IBR3SAD200, IBR3SAD100, IBR3SAD300, and IBR3SAD900 are direct electrical and mechanical equivalents. All parts are manufactured by APEM Inc., carry Active product status, and meet ROHS3 compliance requirements. Selection between these parts is determined by actuator cap color requirements for panel identification or operator interface design. All substitute parts maintain identical electrical performance, mechanical durability ratings, environmental protection (IP54), and operational temperature specifications. No performance degradation occurs when substituting between these part numbers.

Frequently Asked Questions (FAQ)

Q: Can IBR3SAD100, IBR3SAD300, and IBR3SAD900 be used interchangeably with IBR3SAD200?

A: Yes. All four part numbers are electrically and mechanically identical. They share the same SPST-NO circuit, current ratings (400mA AC / 100mA DC), voltage ratings (32V AC / 50V DC), mounting configuration (Panel Mount, Snap-In with 13.60mm cutout), and operational life specifications. The only difference is actuator cap color.

Q: What determines substitution compatibility for IBR3SAD200?

A: Substitution is based on matching electrical specifications (circuit type, current and voltage ratings), mechanical mounting parameters (panel mount type, cutout diameter, termination style), environmental ratings (IP54 ingress protection), and operational life cycles (1,000,000 mechanical / 500,000 electrical). All substitute parts meet these criteria.

Q: Are there any compliance or certification differences between IBR3SAD200 and its substitutes?

A: No. All parts are ROHS3 compliant, carry MSL 1 (Unlimited) moisture sensitivity rating, are REACH Unaffected, and share identical ECCN (EAR99) and HTSUS (8536.50.9031) classifications.

Q: Does actuator cap color affect electrical performance?

A: No. Actuator cap color is a visual identification feature only and does not impact electrical characteristics, switching performance, or mechanical durability.

Q: What is the panel cutout requirement for installation?

A: All parts require a circular panel cutout of 13.60mm diameter for snap-in mounting. This dimension is identical across IBR3SAD200 and all substitute parts.