IA30FLN15PCM1 Equivalent & Substitute Parts

Part Overview

The IA30FLN15PCM1 is an inductive proximity sensor manufactured by Carlo Gavazzi Inc., designed for non-contact object detection in industrial applications. This cylindrical M30-threaded sensor operates with a 15mm sensing distance and provides PNP-NC output configuration. The product is currently classified as obsolete, making identification of functionally equivalent alternatives essential for system maintenance and component procurement.

Substiute Parts

IA30FLN15PCM1

Carlo Gavazzi Inc.In Stock: 795IA30FLN15PCM1 Datasheet

Current PartRFQ

ICF30L45N22M1IO

Carlo Gavazzi Inc.In Stock: 874ICF30L45N22M1IO Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The ICF30L45N22M1IO is identified as a manufacturer-recommended substitute for the IA30FLN15PCM1. Substitution eligibility is determined by the following parameters:

• Sensor Type: Both parts are inductive proximity sensors
• Package / Case: Both use Cylinder, Threaded - M30 form factor, ensuring mechanical compatibility
• Manufacturer: Both are manufactured by Carlo Gavazzi Inc., ensuring design consistency and support continuity
• Termination Style: Both use connector-based termination
• Ingress Protection: The substitute provides IP68 and IP69K ratings, exceeding the original IP67 specification

The primary differences are sensing distance (22mm vs. 15mm), output type (PNP-NO vs. PNP-NC), and operating temperature range (-40°C ~ 85°C vs. -25°C ~ 70°C). These differences must be evaluated against specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

The ICF30L45N22M1IO is the manufacturer-recommended substitute for the obsolete IA30FLN15PCM1. Selection of this substitute is supported by:

• Product Status: The substitute is active and currently in production, ensuring long-term availability and support
• Regulatory Compliance: Both parts maintain REACH Unaffected status and EAR99 ECCN classification
• Environmental Protection: The substitute provides enhanced ingress protection (IP68, IP69K) compared to the original specification (IP67)
• Temperature Range: The substitute operates across a wider temperature range (-40°C ~ 85°C), providing greater operational flexibility
• Material Upgrade: Stainless steel body construction offers improved corrosion resistance compared to diecast metal

Application-specific requirements regarding sensing distance (15mm vs. 22mm) and output logic (NC vs. NO) must be evaluated independently to confirm compatibility with existing system architecture.

Frequently Asked Questions (FAQ)

Q: What is the primary reason for substituting the IA30FLN15PCM1?

A: The IA30FLN15PCM1 is classified as obsolete. The ICF30L45N22M1IO is the manufacturer-recommended active alternative that maintains mechanical and electrical compatibility within the M30 cylindrical sensor family.

Q: Are the sensing distances interchangeable between these two sensors?

A: No. The IA30FLN15PCM1 has a 15mm sensing distance, while the ICF30L45N22M1IO has a 22mm sensing distance. Application requirements must accommodate this difference.

Q: What is the difference between PNP-NC and PNP-NO output types?

A: PNP-NC (Normally Closed) provides a high signal when no object is detected and switches low upon detection. PNP-NO (Normally Open) provides a low signal when no object is detected and switches high upon detection. Circuit logic must be adapted accordingly.

Q: Are both sensors mechanically compatible with M30 threaded installations?

A: Yes. Both sensors use Cylinder, Threaded - M30 packaging, ensuring mechanical interchangeability in mounting applications.

Q: Does the substitute offer improved environmental protection?

A: Yes. The ICF30L45N22M1IO provides IP68 and IP69K ingress protection ratings, exceeding the original IA30FLN15PCM1 IP67 specification.

Q: What is the operating temperature difference between these sensors?

A: The IA30FLN15PCM1 operates from -25°C to 70°C, while the ICF30L45N22M1IO operates from -40°C to 85°C, providing a 15°C lower minimum and 15°C higher maximum operating range.

Q: Are both sensors from the same manufacturer?

A: Yes. Both sensors are manufactured by Carlo Gavazzi Inc., ensuring design consistency and technical support continuity.