IA30FLF10PCM1 Equivalent & Substitute Parts

Part Overview

The IA30FLF10PCM1 is an inductive proximity sensor manufactured by Carlo Gavazzi Inc., designed for non-contact object detection in industrial applications. This cylindrical M30-threaded sensor operates with a 10mm sensing distance and provides PNP-NC output configuration. The product is currently classified as obsolete, making identification of suitable substitute components essential for system maintenance and new installations where equivalent functionality is required.

Substiute Parts

IA30FLF10PCM1

Carlo Gavazzi Inc.In Stock: 1088IA30FLF10PCM1 Datasheet

Current PartRFQ

ICF30L45F15M1IO

Carlo Gavazzi Inc.In Stock: 860ICF30L45F15M1IO Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The ICF30L45F15M1IO has been identified as a substitute based on the following allowable parameter variations:

Compatible Parameters:

• Sensor Type: Both are inductive proximity sensors
• Package / Case: Both use Cylinder, Threaded - M30 form factor
• Termination Style: Both use connector termination
• Material - Body: Both feature stainless steel construction
• Manufacturer: Both are Carlo Gavazzi Inc. products
• Ingress Protection: Substitute provides enhanced IP68/IP69K rating (exceeds IP67 requirement)
• Operating Temperature: Substitute range of -40°C ~ 85°C encompasses the original -25°C ~ 70°C range

Parameter Differences:

• Sensing Distance: 15mm (substitute) vs. 10mm (original)
• Output Type: PNP-NO (substitute) vs. PNP-NC (original)
• Response Frequency: Not specified for substitute
• Voltage Supply: Not specified for substitute
• Product Status: Active (substitute) vs. Obsolete (original)

Parameter Comparison

Engineering Selection Recommendations

The ICF30L45F15M1IO is an active product from the same manufacturer with enhanced environmental protection ratings (IP68/IP69K vs. IP67) and an extended operating temperature range. The substitute maintains mechanical compatibility through identical M30 threaded cylindrical packaging and connector termination.

Selection of this substitute requires evaluation of two critical parameter differences: the increased sensing distance (15mm vs. 10mm) and the inverted output logic (PNP-NO vs. PNP-NC). These differences necessitate application-level assessment to confirm compatibility with existing detection requirements and control circuit logic.

The substitute's active product status ensures ongoing availability and support from Carlo Gavazzi Inc., addressing the obsolescence constraint of the original component.

Frequently Asked Questions (FAQ)

Q: Can the ICF30L45F15M1IO directly replace the IA30FLF10PCM1 without circuit modifications?

A: Direct mechanical installation is possible due to identical M30 threaded cylindrical packaging. However, the inverted output logic (PNP-NO vs. PNP-NC) and increased sensing distance (15mm vs. 10mm) require evaluation of the control circuit and detection geometry. Circuit logic inversion may be necessary.

Q: What is the significance of the sensing distance difference?

A: The IA30FLF10PCM1 detects objects at 10mm distance, while the ICF30L45F15M1IO detects at 15mm. This 5mm difference affects the physical positioning of the sensor relative to the target object. Applications with tight spatial constraints may require mechanical redesign.

Q: Why is the output type different between these sensors?

A: The IA30FLF10PCM1 provides normally closed (NC) output, meaning the output is active when no object is detected. The ICF30L45F15M1IO provides normally open (NO) output, meaning the output is active when an object is detected. Control logic must be adjusted accordingly.

Q: Are both sensors compatible with the same power supply voltage?

A: The IA30FLF10PCM1 operates on 10V ~ 30V. The voltage specification for the ICF30L45F15M1IO is not provided in the available data. Verification of supply voltage compatibility is required before implementation.

Q: What are the packaging differences?

A: Both sensors use identical M30 threaded cylindrical packaging with connector termination. The substitute is supplied in box packaging, while the original specification does not detail packaging format. This does not affect functional compatibility.

Q: How do the environmental ratings compare?

A: The ICF30L45F15M1IO provides superior environmental protection with IP68 and IP69K ratings, compared to the IP67 rating of the IA30FLF10PCM1. Both operate across extended temperature ranges, with the substitute offering -40°C ~ 85°C versus the original -25°C ~ 70°C.