IA08FSF01PO Inductive Proximity Sensor - Equivalent & Substitute Parts

Part Overview

The IA08FSF01PO is an inductive proximity sensor manufactured by Carlo Gavazzi Inc., designed for non-contact detection applications with a 1mm sensing distance. This cylindrical M8-threaded sensor operates across a 10V to 30V supply range and delivers PNP-NO output through 3-wire cable leads. The product is classified as obsolete, making identification of functionally compatible alternatives essential for ongoing system maintenance and new design implementations where equivalent performance parameters are required.

Substiute Parts

IA08FSF01PO

Carlo Gavazzi Inc.In Stock: 1131IA08FSF01PO Datasheet

Current PartRFQ

ICS08S30F20A2IO

Carlo Gavazzi Inc.In Stock: 1230ICS08S30F20A2IO Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the IA08FSF01PO is determined by the following critical parameters:

• Sensor Type: Must be inductive proximity sensor
• Package / Case: Must be Cylinder, Threaded - M8 (mechanical compatibility)
• Voltage - Supply: Must support 10V ~ 30V operating range
• Termination Style: Must use Cable Leads
• Ingress Protection: Must maintain IP67 rating
• Output Type: Must provide compatible switching output (PNP-NO configuration acceptable)

The ICS08S30F20A2IO qualifies as a substitute based on these core parameters. While the sensing distance increases from 1mm to 2mm and response frequency increases from 500Hz to 2kHz, these represent functional enhancements rather than incompatibilities. The substitute maintains identical mechanical form factor, voltage compatibility, termination method, and environmental protection rating.

Parameter Comparison

Engineering Selection Recommendations

The ICS08S30F20A2IO is the designated manufacturer-recommended substitute for the obsolete IA08FSF01PO. Selection of this alternative is supported by:

• Product Status: The substitute maintains active production status, ensuring long-term availability and supply chain continuity
• Compliance: Both parts share identical REACH and ECCN classifications (REACH Unaffected, EAR99), maintaining regulatory equivalence
• Mechanical Compatibility: Identical M8 threaded cylindrical form factor enables direct mechanical installation without enclosure redesign
• Electrical Compatibility: Matching 10V ~ 30V supply voltage range and cable lead termination ensure circuit-level integration without modification
• Environmental Protection: Both sensors maintain IP67 ingress protection, suitable for equivalent operating environments
• Material Enhancement: Stainless steel body construction in the substitute provides improved corrosion resistance compared to diecast metal

The increased sensing distance (2mm vs. 1mm) and response frequency (2kHz vs. 500Hz) represent performance improvements applicable to most detection scenarios. Applications requiring the original 1mm sensing distance specification must evaluate whether the 2mm capability of the substitute meets functional requirements.

Frequently Asked Questions (FAQ)

Q: Can the ICS08S30F20A2IO directly replace the IA08FSF01PO without circuit modifications?

A: Yes. Both sensors operate on identical 10V ~ 30V supply voltage, use cable lead termination, and provide compatible switching outputs. Direct substitution is possible at the circuit level.

Q: What is the primary difference between these two sensors?

A: The sensing distance differs: the original IA08FSF01PO detects objects at 1mm, while the ICS08S30F20A2IO detects at 2mm. The substitute also offers faster response frequency (2kHz vs. 500Hz) and stainless steel construction.

Q: Will the increased sensing distance affect my application?

A: This depends on your specific detection requirements. If your application requires detection at exactly 1mm distance, the 2mm sensing distance of the substitute may not be suitable. If your application can tolerate or benefit from 2mm detection range, the substitute is fully compatible.

Q: Are there any mechanical installation differences?

A: No. Both sensors use identical M8 threaded cylindrical packaging, enabling direct mechanical replacement without enclosure or mounting modifications.

Q: What is the advantage of the stainless steel body in the substitute?

A: Stainless steel provides superior corrosion resistance compared to diecast metal, extending sensor lifespan in humid, chemical, or salt-spray environments.

Q: Is the substitute available in the same packaging format?

A: The substitute is supplied in Box packaging, while the original part was supplied with cable leads. Both use identical cable lead termination style for circuit connection.