IA08FSF01NO Inductive Proximity Sensor - Equivalent & Substitute Parts

Part Overview

The IA08FSF01NO is an inductive proximity sensor manufactured by Carlo Gavazzi Inc., designed for non-contact detection applications with a 1mm sensing distance. This sensor features NPN-NO output configuration, operates across 10V to 30V supply voltage, and is housed in a threaded M8 cylinder package with IP67 ingress protection rating.

The IA08FSF01NO is classified as obsolete. Identifying equivalent and substitute parts is necessary to maintain system functionality, ensure continued availability for replacement and maintenance applications, and support long-term product lifecycle management.

Substiute Parts

IA08FSF01NO

Carlo Gavazzi Inc.In Stock: 1093IA08FSF01NO Datasheet

Current PartRFQ

ICS08S30F20A2IO

Carlo Gavazzi Inc.In Stock: 1230ICS08S30F20A2IO Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the IA08FSF01NO is evaluated based on the following critical parameters that determine functional compatibility:

Mechanical Compatibility: Package type (Cylinder, Threaded - M8) and physical form factor must remain consistent to ensure installation compatibility in existing mounting configurations.

Electrical Compatibility: Supply voltage range (10V ~ 30V), output type configuration, and termination style (Cable Leads) must support integration with existing control circuits.

Sensing Performance: Sensing distance, sensor type (Inductive), and response frequency determine detection capability and application suitability.

Environmental Compliance: Ingress protection rating (IP67) and operating temperature range establish suitability for the intended operating environment.

The substitute part ICS08S30F20A2IO is identified as a Carlo Gavazzi Inc. product within the same sensor family, sharing the same manufacturer, package configuration, supply voltage range, and environmental protection rating. However, this substitute introduces variations in sensing distance (2mm vs. 1mm), response frequency (2kHz vs. 500Hz), output type configuration (Configurable vs. NPN-NO), and operating temperature range (-25°C ~ 80°C vs. -25°C ~ 70°C).

Parameter Comparison

Engineering Selection Recommendations

The ICS08S30F20A2IO is an active product from Carlo Gavazzi Inc. and represents a viable substitute path for the obsolete IA08FSF01NO based on shared mechanical form factor, identical supply voltage range, matching ingress protection rating, and compatible termination style.

Selection of the ICS08S30F20A2IO requires evaluation of application-specific requirements regarding sensing distance tolerance. The increased sensing distance (2mm vs. 1mm) and higher response frequency (2kHz vs. 500Hz) represent functional differences that must be validated against system detection requirements and response timing constraints.

The configurable output type of the ICS08S30F20A2IO provides flexibility for integration with existing control circuits, provided that the required output configuration (NPN-NO) can be established during sensor configuration.

The extended operating temperature range of the ICS08S30F20A2IO (-25°C ~ 80°C) provides additional thermal margin compared to the main part specification.

Frequently Asked Questions (FAQ)

Q: Can the ICS08S30F20A2IO directly replace the IA08FSF01NO in all applications?

A: Direct replacement requires validation of sensing distance requirements. The ICS08S30F20A2IO operates at 2mm sensing distance compared to the IA08FSF01NO at 1mm. Applications requiring detection at 1mm distance may not function correctly with the substitute part. Additionally, the configurable output type must be set to NPN-NO configuration to match the original part's output behavior.

Q: What are the key differences between these two sensors?

A: The primary differences are sensing distance (1mm vs. 2mm), response frequency (500Hz vs. 2kHz), output type (fixed NPN-NO vs. configurable), and operating temperature range (-25°C ~ 70°C vs. -25°C ~ 80°C). Both sensors share identical supply voltage range, package configuration, ingress protection rating, and termination style.

Q: Are both parts from the same manufacturer?

A: Yes, both the IA08FSF01NO and ICS08S30F20A2IO are manufactured by Carlo Gavazzi Inc., ensuring consistency in design philosophy and quality standards.

Q: What is the significance of the product status difference?

A: The IA08FSF01NO is classified as obsolete, indicating discontinued production and limited availability. The ICS08S30F20A2IO is active, ensuring ongoing availability, technical support, and continued manufacturing.

Q: Does the M8 threaded cylinder package remain the same?

A: Yes, both sensors utilize the same Cylinder, Threaded - M8 package configuration, ensuring mechanical compatibility with existing mounting hardware and installation procedures.