IA08BLF15POM5 Equivalent & Substitute Parts

Part Overview

The IA08BLF15POM5 is an inductive proximity sensor manufactured by Carlo Gavazzi Inc., designed for non-contact object detection in industrial applications. This cylindrical M8-threaded sensor operates across a 10V to 30V supply range with a 1.5mm sensing distance and PNP-NO output configuration. The product is classified as obsolete, making identification of functionally equivalent alternatives essential for system maintenance and component procurement.

Substiute Parts

IA08BLF15POM5

Carlo Gavazzi Inc.In Stock: 1009IA08BLF15POM5 Datasheet

Current PartRFQ

ICS08L45F01POM5

Carlo Gavazzi Inc.In Stock: 679ICS08L45F01POM5 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the IA08BLF15POM5 is based on the following critical parameters that must remain consistent:

• Sensor Type: Inductive technology for ferrous metal detection
• Output Configuration: PNP-NO, 3-Wire logic output
• Voltage Supply Range: 10V ~ 30V DC operation
• Package Form Factor: Cylinder, Threaded - M8 mechanical interface
• Termination: Connector-based wiring
• Ingress Protection: IP67 environmental sealing
• Material: Stainless Steel body construction

The ICS08L45F01POM5 qualifies as a functional equivalent based on matching these core electrical and mechanical specifications. While the sensing distance specification is not provided for the substitute part, all other critical parameters align with the original component's requirements.

Parameter Comparison

Engineering Selection Recommendations

The ICS08L45F01POM5 is the identified equivalent for the obsolete IA08BLF15POM5. Selection of this substitute is supported by:

• Product Status: The substitute maintains active manufacturing status, ensuring continued availability and supply chain reliability.
• Electrical Compatibility: Identical output configuration (PNP-NO, 3-Wire), response frequency (2kHz), and voltage supply range (10V ~ 30V) ensure direct functional replacement in existing circuits.
• Mechanical Compatibility: Both sensors share identical M8 threaded cylindrical form factors and connector-based termination, allowing direct mechanical installation without enclosure modifications.
• Environmental Specifications: Both components meet IP67 ingress protection requirements with stainless steel construction, suitable for industrial environments.
• Operating Temperature: The substitute extends the upper operating temperature limit to 80°C compared to the original 70°C specification, providing enhanced thermal margin in applications.

Frequently Asked Questions (FAQ)

Q: Can the ICS08L45F01POM5 directly replace the IA08BLF15POM5 in existing installations?

A: Yes. Both sensors share identical electrical output configuration (PNP-NO, 3-Wire), voltage supply range (10V ~ 30V), response frequency (2kHz), and M8 threaded cylindrical package. Direct mechanical and electrical substitution is supported without circuit or enclosure modifications.

Q: What is the primary reason for seeking a substitute for the IA08BLF15POM5?

A: The IA08BLF15POM5 is classified as obsolete. The ICS08L45F01POM5 is an active product from the same manufacturer, ensuring ongoing availability and supply chain continuity.

Q: Are there differences in sensing distance between these two sensors?

A: The sensing distance specification for the ICS08L45F01POM5 is not provided in the available technical data. Verification of sensing distance compatibility with your specific application requirements is necessary before final component selection.

Q: How do the operating temperature ranges compare?

A: The IA08BLF15POM5 operates from -25°C to 70°C, while the ICS08L45F01POM5 extends to -25°C to 80°C. The substitute provides a 10°C higher upper temperature limit, which may be beneficial in thermally demanding applications.

Q: Are both sensors suitable for the same environmental conditions?

A: Both sensors meet IP67 ingress protection and feature stainless steel construction. The IA08BLF15POM5 additionally lists NEMA 1, 3, 4, 6, 13 compliance. Confirm that the ICS08L45F01POM5 meets any specific NEMA requirements for your application.

Q: What is the connector termination type for these sensors?

A: Both sensors use connector-based termination. Verify connector compatibility with your existing wiring harnesses and control system interfaces before installation.