HW-F01 Equivalent & Substitute Parts Reference

Part Overview

The HW-F01 is a configurable contact block manufactured by IDEC, classified as a configurable switch component. This contact block functions as a modular switching element designed for integration with compatible switch bodies in the HW series. The HW-F01 is currently listed with obsolete product status, indicating it has been discontinued by the manufacturer. Identifying equivalent and substitute parts is necessary to maintain system functionality, ensure continued availability for maintenance and repair operations, and support long-term product lifecycle management.

Substiute Parts

HW-F01

IDECIn Stock: 821HW-F01 Datasheet

Current PartRFQ

HW-U01-F

IDECIn Stock: 1051HW-U01-F Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the HW-F01 is determined by the following critical parameters:

Manufacturer Alignment: Both the main part and substitute must be manufactured by IDEC to ensure design compatibility and quality consistency.

Series Compatibility: The substitute part must belong to the HW series, as this series designation indicates mechanical and electrical compatibility with the same switch body platforms.

Category Classification: The substitute must remain classified as a configurable switch component to maintain functional equivalence.

Component Type: Both parts must function as contact blocks, ensuring they perform identical switching operations within the system.

Regulatory Compliance: The substitute must maintain ROHS3 compliance and REACH unaffected status to satisfy current environmental and regulatory requirements.

The HW-U01-F meets all these substitution criteria and is identified as the manufacturer-recommended substitute for the obsolete HW-F01.

Parameter Comparison

Engineering Selection Recommendations

The HW-U01-F is the appropriate substitute for the obsolete HW-F01 based on the following engineering criteria:

Product Status Transition: The HW-F01 is obsolete, while the HW-U01-F maintains active product status with current manufacturer support and availability. This transition ensures access to replacement inventory and ongoing technical support.

Regulatory Compliance Continuity: Both parts maintain ROHS3 compliance and REACH unaffected status, satisfying current environmental regulations without requiring system redesign or compliance re-evaluation.

Series and Category Alignment: Both parts belong to the HW series and configurable switch components category, confirming mechanical and electrical compatibility with existing switch body assemblies.

Manufacturer Consistency: IDEC manufactures both parts, ensuring design consistency, quality standards, and compatibility with the original system architecture.

The HW-U01-F is available in bulk packaging with 969 pieces in current inventory, supporting both immediate replacement needs and long-term stock management.

Frequently Asked Questions (FAQ)

Q: Why is the HW-F01 being replaced?

A: The HW-F01 has reached obsolete product status, indicating discontinuation by the manufacturer. The HW-U01-F is the active substitute that maintains compatibility with HW series switch bodies while providing continued availability and manufacturer support.

Q: Are the HW-F01 and HW-U01-F mechanically compatible?

A: Yes. Both parts are IDEC-manufactured contact blocks within the HW series. Series designation confirms mechanical compatibility with the same switch body platforms.

Q: What are the electrical specifications of the HW-U01-F?

A: The HW-U01-F is configured as SPST-NO (Single Pole Single Throw, Normally Open) with a contact rating of 10A at 110VAC. It features screw terminal termination and requires a compatible switch body for operation.

Q: Do both parts meet current regulatory requirements?

A: Yes. Both the HW-F01 and HW-U01-F are ROHS3 compliant and REACH unaffected, satisfying current environmental and regulatory standards.

Q: What packaging options are available for the substitute part?

A: The HW-U01-F is supplied in bulk packaging with 969 pieces currently in inventory.

Q: Can the HW-U01-F be used as a direct replacement in existing assemblies?

A: The HW-U01-F is designed for integration with HW series switch bodies. Compatibility with specific existing assemblies depends on the switch body model and system configuration. Verify switch body compatibility before installation.