HVR2500009103JR500 Equivalent & Substitute Parts

Part Overview

The HVR2500009103JR500 is a 910 kOhms ±5% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. Manufactured by Vishay Beyschlag/Draloric/BC Components, this component features flame retardant coating, high voltage capability, and pulse withstanding characteristics suitable for safety-critical applications. The part is Active status with 1159 units in current inventory stock. Substitute parts are identified when design requirements permit tolerance relaxation or when inventory availability necessitates alternative sourcing while maintaining electrical and mechanical compatibility.

Substiute Parts

HVR2500009103JR500

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 1236HVR2500009103JR500 Datasheet

Current PartRFQ

HVR2500009103FR500

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 15721HVR2500009103FR500 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

The HVR2500009103FR500 qualifies as a direct substitute based on the following alignment of critical parameters:

• Identical resistance value: 910 kOhms
• Identical power rating: 0.25W (1/4W)
• Identical package type: Axial through-hole
• Identical physical dimensions: 0.098" Dia x 0.256" L (2.50mm x 6.50mm)
• Identical composition: Metal Film
• Identical temperature coefficient: ±200ppm/°C
• Identical operating temperature range: -55°C to 155°C
• Identical features: Flame Retardant Coating, High Voltage, Pulse Withstanding, Safety
• Identical compliance: ROHS3 Compliant, REACH Unaffected

The substitute part differs only in tolerance specification (±1% versus ±5%), representing an upgrade in precision capability while maintaining full electrical and mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the HVR2500009103JR500 and HVR2500009103FR500 are Active status components manufactured by the same supplier with identical ROHS3 and REACH compliance certifications. Selection between these parts depends on tolerance requirements:

• Use HVR2500009103JR500 when circuit design specifies ±5% tolerance and cost optimization is prioritized.
• Use HVR2500009103FR500 when circuit design requires ±1% tolerance for improved precision, or when higher inventory availability (15632 units versus 1159 units) supports supply chain continuity.

Both parts are electrically and mechanically interchangeable in axial through-hole applications within the specified operating temperature range of -55°C to 155°C.

Frequently Asked Questions (FAQ)

Q: Can HVR2500009103FR500 replace HVR2500009103JR500 in my circuit?

A: Yes. The substitute part maintains identical resistance value, power rating, package type, physical dimensions, and operating characteristics. The only difference is improved tolerance (±1% versus ±5%), which represents enhanced precision and is compatible with any circuit designed for the original part.

Q: What is the key difference between these two parts?

A: The tolerance specification differs. HVR2500009103JR500 carries ±5% tolerance, while HVR2500009103FR500 carries ±1% tolerance. All other electrical and mechanical parameters are identical.

Q: Are the physical dimensions identical?

A: Yes. Both parts measure 0.098" Dia x 0.256" L (2.50mm x 6.50mm) and use identical axial package configuration, ensuring direct board-level compatibility.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are ROHS3 Compliant and REACH Unaffected, meeting identical regulatory requirements.

Q: Which part should I select for new designs?

A: Selection depends on tolerance requirements. For applications requiring ±1% precision, specify HVR2500009103FR500. For applications tolerating ±5% variation, either part is suitable. Consider inventory availability when making procurement decisions.