HVCB2010JTC10M0 Equivalent & Substitute Parts

Part Overview

The HVCB2010JTC10M0 is a 10 MOhms ±5% 1W chip resistor in 2010 (5025 Metric) package manufactured by Stackpole Electronics Inc. This thick film resistor is designed for high voltage applications with moisture resistance and pulse withstanding capabilities. The part is currently active in production with 1088 units in stock. Substitute parts are identified to provide options for tolerance upgrades or inventory availability while maintaining electrical and mechanical compatibility.

Substiute Parts

HVCB2010JTC10M0

Stackpole Electronics IncIn Stock: 1099HVCB2010JTC10M0 Datasheet

Current PartRFQ

HVCB2010FKC10M0

Stackpole Electronics IncIn Stock: 13179HVCB2010FKC10M0 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HVCB2010JTC10M0 is determined by the following critical parameters:

• Resistance value: 10 MOhms (exact match required)
• Package / Case: 2010 (5025 Metric) (exact match required)
• Power rating: 1W (exact match required)
• Composition: Thick Film (exact match required)
• Operating temperature range: -55°C ~ 150°C (exact match required)
• Temperature coefficient: ±50ppm/°C (exact match required)
• Features: High Voltage, Moisture Resistant, Pulse Withstanding (exact match required)
• RoHS and environmental compliance: ROHS3 Compliant, MSL 1, REACH Unaffected (exact match required)

The identified substitute part HVCB2010FKC10M0 meets all critical parameters with a tolerance upgrade from ±5% to ±1%, providing improved accuracy while maintaining full electrical and mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both HVCB2010JTC10M0 and HVCB2010FKC10M0 are active production parts with full ROHS3 compliance and REACH unaffected status. The primary distinction is tolerance specification: the main part offers ±5% tolerance, while the substitute provides ±1% tolerance. Selection between these parts depends on circuit accuracy requirements. The substitute part HVCB2010FKC10M0 provides superior tolerance performance with significantly higher inventory availability (13152 units versus 1088 units). Both parts maintain identical electrical performance characteristics, thermal behavior, and environmental compliance across all specified operating conditions.

Frequently Asked Questions (FAQ)

Q: Can HVCB2010FKC10M0 directly replace HVCB2010JTC10M0 in existing designs?

A: Yes. Both parts share identical resistance value, power rating, package dimensions, operating temperature range, and feature set. The substitute part provides tighter tolerance (±1% versus ±5%), which represents an upgrade in accuracy without any compatibility concerns.

Q: Are there any PCB layout or assembly considerations when switching between these parts?

A: No. Both parts use the 2010 (5025 Metric) package with identical physical dimensions (0.200" L x 0.100" W, 5.08mm x 2.54mm) and maximum seated height (0.030" / 0.76mm). Footprints and assembly processes remain unchanged.

Q: What is the significance of the tolerance difference?

A: Tolerance defines the acceptable deviation from the nominal 10 MOhms resistance value. HVCB2010JTC10M0 allows ±5% deviation (9.5 to 10.5 MOhms), while HVCB2010FKC10M0 allows ±1% deviation (9.9 to 10.1 MOhms). Applications requiring tighter resistance accuracy should specify the ±1% part.

Q: Do both parts meet the same environmental and compliance standards?

A: Yes. Both parts are ROHS3 compliant, REACH unaffected, and carry Moisture Sensitivity Level 1 (unlimited shelf life). Environmental performance and regulatory compliance are identical.

Q: Is there a cost or lead time difference between these parts?

A: Inventory levels differ significantly, with HVCB2010FKC10M0 showing 13152 units in stock compared to 1088 units for HVCB2010JTC10M0. This inventory difference may affect availability and lead times depending on order volume and supplier allocation.