HVCB2010FDC10M0 Equivalent & Substitute Parts

Part Overview

The HVCB2010FDC10M0 is a 10 MOhms ±1% 1W chip resistor in 2010 (5025 Metric) package manufactured by Stackpole Electronics Inc. This high voltage, moisture-resistant thick film resistor is designed for applications requiring pulse withstanding capability and reliable performance across extended temperature ranges. The part is currently active in production with ROHS3 compliance and unlimited moisture sensitivity level rating.

Substitute parts are identified to provide design flexibility, inventory optimization, and supply chain continuity while maintaining identical electrical and mechanical specifications.

Substiute Parts

HVCB2010FDC10M0

Stackpole Electronics IncIn Stock: 994HVCB2010FDC10M0 Datasheet

Current PartRFQ

HVCB2010FKC10M0

Stackpole Electronics IncIn Stock: 13179HVCB2010FKC10M0 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HVCB2010FDC10M0 is determined by strict equivalence across the following critical parameters:

• Resistance value: 10 MOhms
• Tolerance: ±1%
• Power rating: 1W
• Package type: 2010 (5025 Metric)
• Composition: Thick Film
• Temperature coefficient: ±50ppm/°C
• Operating temperature range: -55°C ~ 150°C
• Feature set: High Voltage, Moisture Resistant, Pulse Withstanding
• Compliance: ROHS3 Compliant, MSL 1

The substitute part HVCB2010FKC10M0 meets all specified parameters and is classified as a direct equivalent within the same HVC series from Stackpole Electronics Inc.

Parameter Comparison

Engineering Selection Recommendations

Both HVCB2010FDC10M0 and HVCB2010FKC10M0 are active production parts with identical electrical and mechanical specifications. Selection between these parts may be based on inventory availability and supply chain considerations. Both parts maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory conformance for current and future applications. The MSL 1 rating indicates unlimited shelf life under standard storage conditions, eliminating moisture-related handling constraints for either part.

Frequently Asked Questions (FAQ)

Q: Can HVCB2010FKC10M0 be used as a direct replacement for HVCB2010FDC10M0?

A: Yes. Both parts are electrically and mechanically identical, sharing the same resistance value (10 MOhms), tolerance (±1%), power rating (1W), package type (2010), and feature set. No circuit redesign or board layout modification is required.

Q: Are there any differences in thermal or environmental performance between these parts?

A: No. Both parts have identical temperature coefficients (±50ppm/°C) and operating temperature ranges (-55°C ~ 150°C). Moisture sensitivity level is the same (MSL 1, Unlimited).

Q: Do both parts meet the same compliance standards?

A: Yes. Both HVCB2010FDC10M0 and HVCB2010FKC10M0 are ROHS3 compliant and REACH unaffected, with identical regulatory status.

Q: What determines substitution eligibility for this resistor category?

A: Substitution is valid when the following parameters match exactly: resistance value, tolerance, power rating, package type, composition, temperature coefficient, operating temperature range, and feature set. Both parts meet these criteria.

Q: Are there packaging or tape reel differences between these parts?

A: Both parts are supplied in Tape & Reel (TR) packaging format with identical physical dimensions and termination specifications.