HVCB1206JTL820K Equivalent & Substitute Parts

Part Overview

The HVCB1206JTL820K is an 820 kOhms ±5% thick film chip resistor manufactured by Stackpole Electronics Inc in the 1206 (3216 Metric) package. This high voltage, moisture-resistant component is rated for 0.333W (1/3W) power dissipation with pulse withstanding capability. The part is active in production and widely used in applications requiring high voltage performance with moisture resistance. Substitute parts are identified for applications where alternative manufacturers, enhanced power ratings, or automotive-grade certifications are required while maintaining electrical and mechanical compatibility.

Substiute Parts

HVCB1206JTL820K

Stackpole Electronics IncIn Stock: 1031HVCB1206JTL820K Datasheet

Current PartRFQ

ERJ-P08J824V

Panasonic Electronic ComponentsIn Stock: 11512ERJ-P08J824V Datasheet

MFR RecommendedRFQ

ESR18EZPJ824

Rohm SemiconductorIn Stock: 1188ESR18EZPJ824 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HVCB1206JTL820K is determined by the following criteria:

• Resistance Value: Must be 820 kOhms
• Tolerance: Must be ±5%
• Package: Must be 1206 (3216 Metric)
• Composition: Must be Thick Film
• Temperature Coefficient: Must be ±200ppm/°C
• Moisture Sensitivity Level: Must be 1 (Unlimited)
• RoHS Compliance: Must be ROHS3 Compliant

Power rating may exceed the original specification (0.333W minimum). Operating temperature range may extend beyond the original range. Automotive certifications (AEC-Q200) are permissible enhancements. All identified substitutes meet these core electrical and mechanical parameters.

Parameter Comparison

Engineering Selection Recommendations

ERJ-P08J824V (Panasonic Electronic Components) provides the highest power rating at 0.667W (2/3W) with AEC-Q200 automotive certification. This part is suitable for applications requiring enhanced thermal performance or automotive-grade reliability. The extended operating temperature range to 155°C and reduced seated height of 0.028" (0.70mm) support high-density PCB layouts.

ESR18EZPJ824 (Rohm Semiconductor) offers intermediate power rating at 0.5W (1/2W) with AEC-Q200 automotive certification. This part provides a balance between the original specification and enhanced performance, with the lowest seated height of 0.026" (0.65mm) for space-constrained applications.

All three parts maintain identical electrical specifications (820 kOhms ±5%, ±200ppm/°C), identical package dimensions (1206 / 3216 Metric), and equivalent compliance certifications (ROHS3, MSL 1). Selection between substitutes depends on power dissipation requirements, automotive qualification necessity, and PCB height constraints.

Frequently Asked Questions (FAQ)

Q: Can ERJ-P08J824V or ESR18EZPJ824 be used as direct replacements for HVCB1206JTL820K?

A: Yes. Both substitute parts meet all core electrical parameters (820 kOhms ±5%, ±200ppm/°C) and mechanical specifications (1206 package, identical footprint dimensions). The higher power ratings (0.667W and 0.5W respectively) are compatible with circuits designed for the original 0.333W specification. Seated height differences (0.028" and 0.026" versus 0.030") are within typical PCB assembly tolerances.

Q: What is the significance of AEC-Q200 certification on the substitute parts?

A: AEC-Q200 is an automotive industry qualification standard. ERJ-P08J824V and ESR18EZPJ824 carry this certification, indicating compliance with automotive reliability and performance requirements. The original HVCB1206JTL820K does not specify this certification. Use AEC-Q200 rated substitutes when automotive-grade reliability is required.

Q: Are there any height restrictions when substituting these parts?

A: The substitute parts have reduced seated heights compared to the original: ERJ-P08J824V at 0.028" (0.70mm) and ESR18EZPJ824 at 0.026" (0.65mm) versus HVCB1206JTL820K at 0.030" (0.75mm). These differences are negligible for standard PCB assembly. Verify clearance requirements for applications with tight vertical constraints.

Q: Do all three parts share the same footprint?

A: Yes. All three parts use the 1206 (3216 Metric) package with identical length and width dimensions of 0.126" L x 0.063" W (3.20mm x 1.60mm). PCB footprints are interchangeable without modification.

Q: What is Moisture Sensitivity Level 1 (MSL 1)?

A: MSL 1 indicates unlimited shelf life without moisture control requirements. All three parts carry this rating, meaning they can be stored and handled without special humidity or temperature-controlled packaging.