HVCB1206FTC10M0 Equivalent & Substitute Parts

Part Overview

The HVCB1206FTC10M0 is a 10 MOhms ±1% thick film chip resistor in 1206 (3216 Metric) package manufactured by Stackpole Electronics Inc. This high voltage, moisture-resistant component is designed for applications requiring pulse withstanding capability and reliable performance across extended temperature ranges. The part maintains Active product status with 860 units currently in stock. Substitute parts are identified to address inventory availability, tolerance requirements, or specific application needs while maintaining electrical and mechanical compatibility.

Substiute Parts

HVCB1206FTC10M0

Stackpole Electronics IncIn Stock: 965HVCB1206FTC10M0 Datasheet

Current PartRFQ

HVCB1206DKC10M0

Stackpole Electronics IncIn Stock: 1571HVCB1206DKC10M0 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HVCB1206FTC10M0 is determined by strict equivalence across the following critical parameters:

• Resistance Value: Must be 10 MOhms (exact match required)
• Package / Case: Must be 1206 (3216 Metric) for PCB footprint compatibility
• Power Rating: Must be 0.333W (1/3W) minimum
• Composition: Must be Thick Film
• Operating Temperature Range: Must support -55°C ~ 150°C
• Features: Must include High Voltage, Moisture Resistant, and Pulse Withstanding capability
• Compliance: Must maintain ROHS3 compliance and MSL 1 rating

The identified substitute part HVCB1206DKC10M0 meets all mandatory parameters while offering improved tolerance specification (±0.5% versus ±1%), providing enhanced precision for applications requiring tighter resistance accuracy.

Parameter Comparison

Engineering Selection Recommendations

Both HVCB1206FTC10M0 and HVCB1206DKC10M0 are Active products manufactured by Stackpole Electronics Inc and maintain full ROHS3 compliance with MSL 1 rating. Selection between these parts depends on tolerance requirements:

• HVCB1206FTC10M0 is appropriate for applications where ±1% tolerance meets circuit specifications and cost optimization is prioritized.
• HVCB1206DKC10M0 is appropriate for applications requiring ±0.5% tolerance for improved resistance accuracy. This part offers higher inventory availability (1461 units versus 860 units).

Both parts are electrically and mechanically interchangeable within their respective tolerance classes and maintain identical thermal, dimensional, and compliance characteristics.

Frequently Asked Questions (FAQ)

Q: Can HVCB1206DKC10M0 be used as a direct replacement for HVCB1206FTC10M0?

A: Yes. Both parts share identical resistance value, package, power rating, operating temperature range, and feature set. The primary difference is tolerance specification (±0.5% versus ±1%). Direct substitution is valid for applications where the tighter tolerance of the DKC variant does not create cost or sourcing conflicts.

Q: Are there any PCB layout or footprint differences between these parts?

A: No. Both parts use the 1206 (3216 Metric) package with identical dimensions (0.126" L x 0.063" W / 3.20mm x 1.60mm) and maximum seated height (0.030" / 0.75mm). PCB footprints are identical.

Q: What is the significance of the tolerance difference?

A: The HVCB1206DKC10M0 offers ±0.5% tolerance compared to ±1% for the HVCB1206FTC10M0. This means the DKC variant maintains resistance values within a narrower range around the 10 MOhms nominal value, providing improved precision for circuits sensitive to resistance variation.

Q: Do both parts meet the same compliance and environmental standards?

A: Yes. Both parts are ROHS3 compliant, REACH unaffected, and carry MSL 1 (Unlimited) moisture sensitivity rating. Both support the full -55°C ~ 150°C operating temperature range with ±50ppm/°C temperature coefficient.

Q: Which part should be selected for new designs?

A: Selection depends on circuit tolerance requirements. For applications requiring ±1% tolerance, either part is suitable. For applications requiring ±0.5% tolerance, HVCB1206DKC10M0 is the appropriate choice. Both parts are Active products with stable long-term availability.