HVCB0805FDC100K Equivalent & Substitute Parts

Part Overview

The HVCB0805FDC100K is a 100 kOhms ±1% thick film chip resistor in 0805 (2012 Metric) package manufactured by Stackpole Electronics Inc. This high voltage, moisture-resistant component is rated for 0.2W (1/5W) power dissipation and is designed for applications requiring pulse withstanding capability. The part maintains active product status and is RoHS3 compliant with unlimited moisture sensitivity level (MSL 1).

Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained within the specified parameter tolerances for this product category.

Substiute Parts

HVCB0805FDC100K

Stackpole Electronics IncIn Stock: 1180HVCB0805FDC100K Datasheet

Current PartRFQ

ERJ-PB6B1003V

Panasonic Electronic ComponentsIn Stock: 4484ERJ-PB6B1003V Datasheet

MFR RecommendedRFQ

ERJ-PB6D1003V

Panasonic Electronic ComponentsIn Stock: 212147ERJ-PB6D1003V Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the HVCB0805FDC100K are qualified based on the following criteria:

Mandatory Compatibility Parameters:

• Resistance value: 100 kOhms (exact match required)
• Package / Case: 0805 (2012 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature Coefficient: ±50ppm/°C (exact match required)
• RoHS Status: ROHS3 Compliant (minimum requirement)
• Moisture Sensitivity Level: 1 (Unlimited) (minimum requirement)

Allowable Variations:

• Tolerance: ±1% or tighter (±0.1%, ±0.5% acceptable)
• Power Rating: 0.25W (1/4W) or higher (exceeds 0.2W minimum)
• Operating Temperature Range: -55°C ~ 155°C or equivalent (meets or exceeds -55°C ~ 150°C)

The identified substitute parts maintain all mandatory parameters while offering equal or superior electrical performance through tighter tolerance specifications and higher power ratings.

Parameter Comparison

Engineering Selection Recommendations

Both ERJ-PB6B1003V and ERJ-PB6D1003V are qualified substitutes for the HVCB0805FDC100K based on electrical and mechanical compatibility.

ERJ-PB6B1003V (±0.1% Tolerance): This substitute offers superior tolerance specification (±0.1% versus ±1%) and higher power rating (0.25W versus 0.2W). It carries AEC-Q200 automotive qualification and maintains all mandatory compatibility parameters. Operating temperature range extends to 155°C, providing additional thermal margin.

ERJ-PB6D1003V (±0.5% Tolerance): This substitute provides intermediate tolerance specification (±0.5%) and equivalent power rating upgrade (0.25W). It also carries AEC-Q200 automotive qualification and meets all mandatory compatibility requirements with extended operating temperature range to 155°C.

Both substitutes are RoHS3 compliant with MSL 1 rating and maintain the same 0805 package footprint and thick film composition. Selection between these options depends on application-specific tolerance requirements and automotive qualification needs.

Frequently Asked Questions (FAQ)

Q: Can ERJ-PB6B1003V and ERJ-PB6D1003V be used interchangeably with HVCB0805FDC100K?

A: Both parts are mechanically and electrically compatible substitutes. They share identical 0805 package dimensions, 100 kOhms resistance value, ±50ppm/°C temperature coefficient, and RoHS3 compliance. The primary differences are tolerance specification (±0.1% and ±0.5% respectively versus ±1%) and power rating (0.25W versus 0.2W), both representing equal or superior performance.

Q: What are the physical dimension differences between these parts?

A: All three parts use the 0805 (2012 Metric) package. The HVCB0805FDC100K measures 0.079" L x 0.050" W (2.01mm x 1.27mm) with maximum seated height of 0.025" (0.64mm). The Panasonic substitutes measure 0.079" L x 0.049" W (2.00mm x 1.25mm) with maximum seated height of 0.028" (0.70mm). These dimensional variations are within standard 0805 package tolerances and do not affect PCB footprint compatibility.

Q: Are there temperature range considerations for substitution?

A: The HVCB0805FDC100K operates from -55°C to 150°C. Both substitute parts extend the upper operating limit to 155°C, providing additional thermal margin. The lower operating limit remains -55°C for all three parts. This extended range in substitutes does not create compatibility issues in applications designed for the original part's temperature range.

Q: Do the substitute parts require different handling or storage procedures?

A: All three parts carry MSL 1 (Unlimited) moisture sensitivity level, indicating identical moisture handling requirements. No additional precautions are necessary when substituting ERJ-PB6B1003V or ERJ-PB6D1003V for the HVCB0805FDC100K.

Q: What is the significance of AEC-Q200 qualification on the substitute parts?

A: AEC-Q200 is an automotive industry qualification standard. The Panasonic substitutes carry this certification while the Stackpole original does not list this qualification. This does not prevent substitution in non-automotive applications and provides additional qualification assurance for automotive use cases.