HV101 Equivalent & Substitute Parts

Part Overview

The HV101 is an IEPE accelerometer manufactured by Amphenol Wilcoxon Sensing Technologies, designed for single-axis acceleration measurement. This motion sensor operates as an analog voltage output device with a sensitivity of 100 mV/g and measures acceleration along the X-axis within a range of ±80g. The HV101 is classified as an active product with full RoHS compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical and mechanical parameters are required for applications where the original part is unavailable, discontinued, or when alternative packaging configurations are necessary.

Substiute Parts

HV101

Amphenol Wilcoxon Sensing TechnologiesIn Stock: 1123HV101 Datasheet

Current PartRFQ

HV200

Amphenol Wilcoxon Sensing TechnologiesIn Stock: 1173HV200 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the HV101 are identified based on strict parametric equivalence across all critical electrical and mechanical specifications. The substitution logic is based on the following key parameters that must remain identical:

• Acceleration Range: ±80g
• Sensitivity: 100 mV/g
• Bandwidth: 0.5Hz ~ 12kHz
• Output Type: Analog Voltage
• Supply Voltage: 18V ~ 30V
• Operating Temperature Range: -40°C ~ 120°C
• Mounting Type: Chassis Mount
• Package / Case: Module
• RoHS Compliance: Required
• Manufacturer: Amphenol Wilcoxon Sensing Technologies

Parts meeting all these criteria are classified as parametric equivalents and may be substituted without modification to circuit design or mechanical integration. Packaging configuration differences (such as bulk versus standard packaging) do not affect functional equivalence.

Parameter Comparison

Engineering Selection Recommendations

Both the HV101 and HV200 are active products manufactured by Amphenol Wilcoxon Sensing Technologies with identical electrical and mechanical specifications. Both parts carry full RoHS compliance certification and unlimited moisture sensitivity rating (MSL 1), making them suitable for equivalent applications without design modification.

The HV101 and HV200 differ only in packaging configuration. The HV101 is supplied in standard packaging, while the HV200 is supplied in bulk packaging. This distinction affects procurement and inventory management but does not impact functional performance or circuit integration.

Selection between these parts should be based on packaging requirements and inventory availability. Both parts are suitable for direct substitution in applications requiring X-axis acceleration measurement with ±80g range, 100 mV/g sensitivity, and 0.5Hz to 12kHz bandwidth operation.

Frequently Asked Questions (FAQ)

Q: Can the HV200 be used as a direct replacement for the HV101?

A: Yes. The HV200 is a parametric equivalent with identical electrical specifications, acceleration range, sensitivity, bandwidth, supply voltage, operating temperature range, and mounting configuration. Direct substitution is possible without circuit or mechanical redesign.

Q: What is the difference between HV101 and HV200?

A: The primary difference is packaging configuration. The HV101 is supplied in standard packaging, while the HV200 is supplied in bulk packaging. All electrical and mechanical parameters are identical.

Q: Are both parts RoHS compliant?

A: Yes. Both the HV101 and HV200 are RoHS compliant and carry MSL 1 (unlimited) moisture sensitivity rating.

Q: What is the sensitivity specification for both parts?

A: Both parts have a sensitivity of 100 mV/g with a 5% tolerance specification.

Q: Can these accelerometers measure acceleration on multiple axes?

A: No. Both the HV101 and HV200 are single-axis sensors designed to measure acceleration along the X-axis only.

Q: What is the operating temperature range for these sensors?

A: Both parts operate across a temperature range of -40°C to 120°C.

Q: What supply voltage is required for these accelerometers?

A: Both parts require a supply voltage between 18V and 30V.

Q: What is the frequency bandwidth of these sensors?

A: Both parts have a bandwidth of 0.5Hz to 12kHz, defining the frequency range over which acceleration measurements are accurate.