HTSW-130-07-S-T Equivalent & Substitute Parts

Part Overview

The HTSW-130-07-S-T is a rectangular connector header manufactured by Samtec Inc., designed for through-hole mounting applications. This connector features 90 positions arranged in 3 rows with 0.100" (2.54mm) pitch spacing, suitable for board-to-board or cable interconnection. The part is currently active in production with full inventory availability. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design flexibility permits component selection from equivalent product lines.

Substiute Parts

HTSW-130-07-S-T

Samtec Inc.In Stock: 988HTSW-130-07-S-T Datasheet

Current PartRFQ

TSW-130-07-S-T

Samtec Inc.In Stock: 917TSW-130-07-S-T Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HTSW-130-07-S-T is determined by strict alignment of the following critical parameters:

• Connector type (Header)
• Contact type (Male Pin)
• Number of positions (90)
• Number of rows (3)
• Pitch - mating (0.100" / 2.54mm)
• Row spacing - mating (0.100" / 2.54mm)
• Mounting type (Through Hole)
• Termination method (Solder)
• Contact material (Phosphor Bronze)
• Contact finish - mating (Gold)
• Contact finish - post (Tin)
• Operating temperature range (-55°C ~ 125°C)
• Material flammability rating (UL94 V-0)
• RoHS compliance (ROHS3 Compliant)

The TSW-130-07-S-T meets all critical substitution criteria and is classified as a direct equivalent part.

Parameter Comparison

Engineering Selection Recommendations

Both the HTSW-130-07-S-T and TSW-130-07-S-T are active production parts manufactured by Samtec Inc. with identical electrical and mechanical specifications for mating interface, contact configuration, and operating conditions. Both parts carry ROHS3 compliance and UL94 V-0 flammability certification.

The primary difference between these parts is the insulation material composition: the HTSW series uses Liquid Crystal Polymer (LCP) while the TSW series uses Polybutylene Terephthalate (PBT). Both materials meet the specified flammability and temperature requirements. The TSW-130-07-S-T carries an MSL rating of 1 (Unlimited), while the HTSW-130-07-S-T is not applicable for MSL classification.

Selection between these parts should be based on specific application requirements regarding insulation material properties and moisture sensitivity handling procedures.

Frequently Asked Questions (FAQ)

Q: Are the HTSW-130-07-S-T and TSW-130-07-S-T mechanically interchangeable?

A: Yes. Both parts share identical mating pitch (0.100"), row spacing (0.100"), contact configuration (90 positions in 3 rows), contact dimensions, and through-hole mounting specifications. Physical and electrical interface compatibility is confirmed.

Q: What is the difference between LCP and PBT insulation materials in these connectors?

A: The HTSW-130-07-S-T uses Liquid Crystal Polymer (LCP) insulation, while the TSW-130-07-S-T uses Polybutylene Terephthalate (PBT) insulation. Both materials are UL94 V-0 rated and support the -55°C to 125°C operating temperature range. Material selection depends on specific application environmental and mechanical requirements.

Q: Does moisture sensitivity level affect part selection?

A: The TSW-130-07-S-T carries an MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions. The HTSW-130-07-S-T is not classified for MSL. If moisture sensitivity handling is a design or manufacturing constraint, the TSW-130-07-S-T may be preferred.

Q: Are both parts RoHS compliant?

A: Yes. Both the HTSW-130-07-S-T and TSW-130-07-S-T are ROHS3 compliant and carry identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications.

Q: Can these parts be used in high-temperature applications?

A: Both parts are rated for operating temperatures from -55°C to 125°C. Applications requiring operation outside this range require alternative component selection.