HTSW-130-07-G-D Equivalent & Substitute Parts

Part Overview

The HTSW-130-07-G-D is a vertical through-hole rectangular connector header manufactured by Samtec Inc. in the HTSW series. This 60-position, 2-row connector with 0.100" (2.54mm) pitch is designed for board-to-board or cable applications. The part is currently active in production with 960 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are required for design flexibility, inventory management, or supply chain continuity.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Number of Positions	60
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Termination	Solder
Contact Material	Phosphor Bronze
Contact Finish - Mating	Gold
Operating Temperature Range	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the HTSW-130-07-G-D is determined by the following critical parameters:

Connector Type & Contact Configuration: Header with male pins, 60 positions, 2 rows
Pitch Specification: 0.100" (2.54mm) mating pitch and row spacing
Mounting & Termination: Through-hole solder termination
Contact Material & Finish: Phosphor bronze with gold mating surface
Environmental Compliance: UL94 V-0 flammability rating, RoHS compliance, MSL 1

The three identified substitute parts (67996-160HLF, 77313-101-60LF, 77313-118-60LF) meet these core electrical and mechanical requirements. Variations exist in contact post length, insulation material composition, and operating temperature upper limits, which are documented in the parameter comparison table below.

Parameter Comparison

Parameter	HTSW-130-07-G-D (Samtec)	67996-160HLF (Amphenol ICC)	77313-101-60LF (Amphenol ICC)	77313-118-60LF (Amphenol ICC)
Manufacturer	Samtec Inc.	Amphenol ICC (FCI)	Amphenol ICC (FCI)	Amphenol ICC (FCI)
Series	HTSW	BERGSTIK® II	BERGSTIK®	BERGSTIK®
Connector Type	Header	Header	Header, Breakaway	Header, Breakaway
Number of Positions	60	60	60	60
Number of Rows	2	2	2	2
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Contact Length - Mating	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)
Contact Length - Post	0.100" (2.54mm)	0.095" (2.41mm)	0.095" (2.41mm)	0.120" (3.05mm)
Overall Contact Length	0.430" (10.92mm)	0.425" (10.80mm)	0.425" (10.80mm)	0.450" (11.43mm)
Insulation Height	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Contact Shape	Square	Square	Square	Square
Contact Finish - Mating	Gold	Gold or Gold, GXT™	Gold or Gold, GXT™	Gold or Gold, GXT™
Contact Finish Thickness - Mating	10.0µin (0.25µm)	30.0µin (0.76µm)	30.0µin (0.76µm)	30.0µin (0.76µm)
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze
Operating Temperature	-55°C ~ 125°C	-65°C ~ 125°C	-65°C ~ 130°C	-65°C ~ 130°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Current Rating	Varies by Wire Gauge	3A per Contact	3A per Contact	3A per Contact
RoHS Status	ROHS3 Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
REACH Status	REACH Unaffected	REACH Unaffected	REACH Affected	REACH Affected

Engineering Selection Recommendations

All three substitute parts maintain active product status and meet core UL94 V-0 flammability and RoHS compliance requirements equivalent to the HTSW-130-07-G-D.

67996-160HLF (BERGSTIK® II): This part offers the closest mechanical alignment with a contact post length of 0.095" (2.41mm), resulting in an overall contact length of 0.425" (10.80mm). The BERGSTIK® II series provides enhanced mating surface finish thickness (30.0µin vs. 10.0µin) and maintains REACH Unaffected status. Operating temperature range extends to -65°C minimum and 125°C maximum.

77313-101-60LF (BERGSTIK®): This breakaway header variant features the same contact post length as 67996-160HLF (0.095", 2.41mm) but extends the operating temperature upper limit to 130°C. The tin-plated post finish (78.7µin thickness) differs from the HTSW-130-07-G-D. REACH Affected status applies to this part.

77313-118-60LF (BERGSTIK®): This breakaway header variant provides the longest contact post length at 0.120" (3.05mm), resulting in an overall contact length of 0.450" (11.43mm). This represents a 0.020" (0.51mm) increase compared to the original part. Operating temperature range extends to -65°C minimum and 130°C maximum. REACH Affected status applies to this part.

Selection between these substitutes depends on specific application requirements regarding contact post length, operating temperature range, and regulatory compliance status.

Frequently Asked Questions (FAQ)

Q: Can 67996-160HLF be used as a direct replacement for HTSW-130-07-G-D?

A: Yes, for applications where the contact post length variation of -0.005" (-0.13mm) is acceptable. The 67996-160HLF maintains equivalent mating pitch, row spacing, contact material, and flammability rating. The increased mating surface finish thickness (30.0µin vs. 10.0µin) provides enhanced durability.

Q: What is the primary difference between 77313-101-60LF and 77313-118-60LF?

A: The contact post length differs: 77313-101-60LF has 0.095" (2.41mm) post length, while 77313-118-60LF has 0.120" (3.05mm) post length. This results in overall contact lengths of 0.425" and 0.450" respectively. Both parts share identical mating pitch, row spacing, and operating temperature range (-65°C ~ 130°C).

Q: Are all substitute parts RoHS compliant?

A: Yes, all three substitute parts are RoHS compliant. However, 77313-101-60LF and 77313-118-60LF carry REACH Affected status, while 67996-160HLF maintains REACH Unaffected status. The HTSW-130-07-G-D is REACH Unaffected.

Q: What packaging differences exist between these parts?

A: HTSW-130-07-G-D is supplied in Bulk packaging. 67996-160HLF is supplied in Bag packaging. Both 77313-101-60LF and 77313-118-60LF are supplied in Bulk packaging.

Q: Do the substitute parts support breakaway functionality?

A: 67996-160HLF (BERGSTIK® II) is a standard header without breakaway capability. Both 77313-101-60LF and 77313-118-60LF are breakaway header variants, allowing individual pins to be separated from the main connector body.

Q: What is the significance of the mating surface finish thickness difference?

A: The HTSW-130-07-G-D specifies 10.0µin (0.25µm) gold finish thickness on mating contacts. All three substitute parts specify 30.0µin (0.76µm) thickness, providing a thicker protective layer that may enhance contact durability and wear resistance in high-cycle mating applications.

Q: Are there temperature range limitations when selecting a substitute?

A: The HTSW-130-07-G-D operates from -55°C to 125°C. Substitute parts 77313-101-60LF and 77313-118-60LF extend the upper limit to 130°C and lower limit to -65°C. If your application requires operation below -55°C, only 67996-160HLF, 77313-101-60LF, or 77313-118-60LF are suitable.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message